Updated November 2026
The Apple AirPods Pro 1st gen are easy to identify, set up and tune once you know what to look for. This guide shows you how to confirm your model, pair and update the earbuds, find the ear tip that seals properly, and adjust noise cancelling and transparency. It also covers the fixes owners most often need.
Confirm You Have the 1st Generation Model
The first-generation AirPods Pro have a stem with a silicone ear tip and a force sensor on the stem. They do not have a built-in speaker for Find My sounds in the same way as later models, and the case has a Lightning port. Check the model number printed on the inside of the case or in the Bluetooth settings on your device. If the case has a USB-C port or the earbuds have a Conversation Awareness or Adaptive Audio feature, you have a newer model.
Shopping for one? See our guide: 3 Best Apple AirPods Pro Replacement Options for Every Fit (2026).
Pair and Update the Earbuds
Open the case near your iPhone, keep the lid up and tap Connect when the setup card appears. Sign in with the same Apple ID on each device you plan to use. After pairing, go to Settings, tap your AirPods, and confirm the firmware version is current. Firmware updates install on their own when the earbuds are in the case, charging and near a signed-in iPhone, so leave them there overnight if an update is pending.
Get the Right Fit for Noise Cancelling
Noise cancelling depends on a tight seal, so fit matters more than any setting. Apple includes three ear tip sizes in the box. Put the earbud in, then play a track and run the Ear Tip Fit Test in the AirPods settings. If the test reports a poor seal, try the next size up or down. Gently twist and push the stem so the tip sits flat against the ear canal opening, not just inside the outer ear.
- Open Settings, tap your AirPods, then tap Ear Tip Fit Test.
- Play audio and wait for the result.
- If the result is poor, switch sizes and test again.
- Leave the best-fitting size in place for daily use.
Adjust Noise Control and Transparency
Swipe down on the AirPods stem from the Control Center or long-press the stem to cycle between Noise Cancellation, Transparency and Off. Noise Cancellation works best for steady sounds such as trains, fans and air conditioning. Transparency lets outside sound through, which helps for announcements and conversations. Test each mode in the environment where you use it most, since the difference is more noticeable on a bus than in a quiet office.
Common Mistakes
- Using the wrong ear tip size, which weakens both noise cancelling and bass.
- Leaving the earbuds out of the case for long periods without charging the case.
- Skipping firmware updates, which can affect connection stability.
- Cleaning the mesh openings with a sharp tool; use a dry, soft brush instead.
- Assuming a dropped connection is a hardware fault before resetting the pairing.
Recommended Gear
- Spare ear tips in multiple sizes help you keep a seal after the originals wear out or get lost. View on Amazon
- A soft cleaning brush lets you clear the mesh openings without pushing debris deeper. View on Amazon
FAQ
Can I use the AirPods Pro 1st gen with Android?
You can pair them with an Android phone over Bluetooth, but features such as Adaptive Audio, automatic switching and firmware updates depend on an Apple device. Basic playback and noise control modes generally still work.
Why does one earbud sound quieter than the other?
This is usually a fit problem, with one tip not sealing well, or debris blocking the mesh. Run the fit test, then clean the speaker opening with a dry brush before checking balance in Settings.
How do I know when the battery needs replacing?
If playback time drops sharply after a full charge, or the case no longer holds a charge overnight, the battery is wearing down. Apple provides battery service options, and a professional should handle any battery replacement.
Conclusion
Confirm your model, pair the earbuds and keep them updated, then find the ear tip that passes the fit test. With a good seal and the right noise mode for your surroundings, the Apple AirPods Pro 1st gen should perform reliably. For newer features or comparisons, see Difference Between AirPods Pro 2 and 3: Key Features Explained.
Related reading
- Apple AirPods Pro 2 Gen: Features, Fit, and What to Know (2026)
- Airpods Pro 1st Gen: Which Model Is It and What Fixes Common Problems?
- Apple Airpods Pro 3 Case: How to Choose the Right One and Use It Well
- Apple AirPods Pro 3: Features, Fit, Setup and Buying Tips (2026)
- Apple AirPods Pro 3 Wireless Earbuds Review: Is It Worth It?

