Updated November 2026
Cleaning an AirPods case takes about five minutes and only a few basic supplies. You will remove lint and debris from the charging case, clean the hinge and lid, and clean the charging contacts without moisture getting into the openings. Doing this regularly keeps the case looking cleaner and helps the charging connection stay reliable.
What You Need Before You Start
Gather your supplies first so you are not tempted to use something harsh halfway through. Most cleaning jobs need only soft, dry materials and a small amount of isopropyl alcohol.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
- A soft, dry microfiber cloth
- A dry soft-bristled brush, such as a clean, dry toothbrush with soft bristles
- A wooden or plastic toothpick for lint in tight corners
- Isopropyl alcohol at 70 percent concentration, on a cloth only
- Cotton swabs for the charging contacts
How to Remove Lint and Debris
Start with the dry methods. Most of the grime inside a case is pocket lint and dust, and it collects in the hinge and along the seam where the lid meets the body.
- Open the lid fully and hold the case face down over a trash can, then tap it gently to loosen debris.
- Use the dry brush to sweep the hinge area and the inner rim of the case.
- Run a toothpick carefully along the hinge gap to lift out packed lint. Avoid pressing hard or pushing debris deeper.
- Wipe the outside with the dry microfiber cloth.
How to Clean the Exterior and Charging Contacts
For fingerprints, oils, and grime on the outer shell, a slightly damp cloth works well. Keep moisture away from the openings, the speaker mesh, and the charging port.
- Dampen a microfiber cloth lightly with isopropyl alcohol or water. Wring it out until it is barely damp.
- Wipe the outer shell and the lid in gentle strokes.
- Dip a cotton swab in isopropyl alcohol, squeeze out the excess, and clean the charging contacts inside the case. Let them air dry for a few minutes before closing the lid.
- Dry any remaining moisture with a clean, dry cloth.
Cleaning the Hinge and Lid Seam
Yellowing and dark staining often start in the hinge and along the lid seam, where oils build up. Clean these areas with the same damp-cloth method, and use a cotton swab for the tight corners. Gently work the lid open and closed a few times to make sure no debris is trapped. If the case is discolored after cleaning, the cause may be material aging rather than dirt. For more on that, see Why Is My AirPods Case Turning Yellow? Causes and Fixes.
Common Mistakes to Avoid
- Do not submerge the case or spray cleaner directly onto it.
- Avoid bleach, abrasive scrubs, and household cleaners with strong solvents.
- Do not use paper towels, which can leave fibers and scratch the finish.
- Never insert a metal object deep into the charging port or speaker openings.
- Let the contacts dry fully before placing earbuds back in the case.
Recommended Gear
- Soft microfiber cloths are gentle on glossy and matte finishes and leave no lint behind. View on Amazon
- Soft-bristle cleaning brushes make it easier to reach the hinge without scratching the surface. View on Amazon
- Isopropyl alcohol wipes are useful for sanitizing contacts when used sparingly and allowed to dry. View on Amazon
FAQ
Can I use water to clean my AirPods case?
You can use a barely damp cloth on the outer shell, but avoid soaking the case or letting water reach the openings. Dry the case thoroughly afterward.
How often should I clean my AirPods case?
Many owners wipe the case weekly and do a deeper hinge and contact cleaning monthly, especially if it lives in a pocket or bag. Clean it sooner if it looks visibly dirty.
Is it safe to use cotton swabs on the charging contacts?
Yes, as long as the swab is only slightly damp with isopropyl alcohol and fully dry before use. If charging problems continue after cleaning, see Why AirPods Not Charge in Case? 6 Causes and Fixes.
Conclusion
Cleaning an AirPods case is a simple routine: remove lint with dry tools, wipe the shell with a barely damp cloth, and clean the contacts with alcohol on a swab. Keep moisture away from the openings and let everything dry completely. A regular five-minute cleaning will keep the case looking better and charging more reliably.

