Updated November 2026
Noise cancelling headphones are headphones that use microphones and electronic circuits to detect outside sound and produce an inverted copy of it, so the two cancel out before they reach your ears. In short, the noise cancelling headphones definition comes down to active noise control built into the earcup. They work best on steady, low-frequency sounds like airplane engines, HVAC hum and road rumble.
Why Noise Cancelling Happens
Sound is a pressure wave. When a wave of a given shape and strength meets a wave of the same shape but flipped upside down, the two cancel. Noise cancelling headphones apply this principle in real time. Small microphones on the outside of each earcup sample the ambient sound, a processor generates an anti-noise signal, and the driver plays it back, typically within a few milliseconds. Your brain then hears less of the original noise.
Shopping for one? See our guide: Better Noise Cancelling Headphones: 6 Best Picks Compared (2026).
Because the processor has to react quickly, it handles predictable, repetitive sounds far better than sudden ones. A jet engine drone is easy to cancel. A dropped coffee mug or a voice in the next seat is not.
Key Factors That Shape Performance
Not every pair of headphones labeled noise cancelling performs the same way. Several factors matter:
- Active versus passive isolation. Passive isolation comes from the physical seal and padding of the earcup. Active cancellation adds electronics on top of that. Many headphones use both.
- Feedforward and feedback microphones. Feedforward mics sit on the outside and sample incoming noise. Feedback mics sit inside the earcup and listen to what is actually reaching your ear, which helps correct for fit. Some designs combine both.
- Fit and seal. Manufacturers generally specify that over-ear designs with a snug, sealed cup perform better than on-ear or loosely fitting models. A poor seal lets noise leak around the edges.
- Frequency range. Cancellation is strongest in the low frequencies, roughly below a few hundred hertz. High-pitched sounds such as voices and keyboard clicks are usually reduced mainly by passive padding.
What to Do If Noise Cancelling Seems Weak
If your headphones are not cancelling as much as you expect, work through these checks before assuming the product is faulty:
- Confirm that noise cancelling is switched on. Many models have a dedicated button or a mode setting in the companion app.
- Check that the battery is charged. Most active systems reduce performance or shut off when the battery runs low.
- Adjust the headband and ear cushions so the cups sit flat around your ears with no gap.
- Test with a steady source such as a fan or engine noise. Sudden sounds will always leak through more.
- Update the firmware through the manufacturer’s app, since owners often report changes in cancellation after updates.
What We’d Use
For a straightforward over-ear pair with strong active cancellation, look at View on Amazon, which is a common reference point in this category.
For a lighter, more travel-friendly option, View on Amazon is widely recommended for steady-noise environments.
FAQ
Do noise cancelling headphones block all sound?
No. They reduce steady low-frequency noise the most. Sudden, sharp or high-pitched sounds are only partly reduced, and you will still hear voices and alarms.
Do noise cancelling headphones need batteries?
Active cancellation does, because the processor and microphones need power. Many models still offer passive isolation when switched off or wired.
Are noise cancelling headphones safe for long use?
They do not raise volume on their own, but people often turn music up to mask noise, which can strain hearing. Keep the volume moderate and consult a hearing professional if you have ongoing concerns.

