Updated November 2026
To reset AirPods Pro, you remove them from every device they are linked to, then hold the button on the back of the case until the status light flashes amber and then white. This wipes the pairing data and returns the earbuds to factory settings. The process takes about a minute, and it fixes most stubborn connection, audio, and pairing problems.
When a Reset Makes Sense
A full reset is useful when the earbuds won’t connect to your iPhone, keep dropping audio, or refuse to pair with a new device. It’s also the right move before you sell or give away your AirPods Pro, since it removes your Apple ID from the earbuds. Try simpler fixes first, such as restarting your phone or charging the case, because a reset erases your custom settings.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
How to Reset AirPods Pro Step by Step
- Place both AirPods in the case and close the lid.
- On your iPhone or iPad, go to Settings, then Bluetooth, tap the info icon next to your AirPods, and choose Forget This Device. Confirm it.
- Open the lid of the case and keep it near your iPhone.
- Press and hold the setup button on the back of the case for about 15 seconds, until the status light flashes amber, then white.
- Close the lid, wait about 30 seconds, then open it again near your iPhone.
- Follow the on-screen prompts to pair the earbuds again.
Resetting AirPods Pro Without an iPhone
If you don’t have an iPhone nearby, you can still reset the earbuds, though you’ll need to unpair them from any Apple device on your account manually. On a Mac, open System Settings, go to Bluetooth, and remove the AirPods. Then use the same 15-second hold on the case button. Once the light flashes amber and white, the earbuds are reset, and you can pair them again with any compatible device. For another angle, check out WiiM Pro Plus Bluetooth Codec: What It Supports and How to Use It.
Confirming the Reset Worked
After pairing again, check that both earbuds play audio, that each one responds to a press on the stem, and that the battery status appears on your phone. If one earbud still cuts out, the problem may be hardware or fit rather than pairing. Owners often report that a clean reset resolves issues caused by a corrupted connection, but it won’t repair physical damage.
Common Mistakes
- Holding the button for only a few seconds, which doesn’t trigger the reset.
- Forgetting to remove the AirPods from your Apple ID first, which can cause pairing loops.
- Resetting while the case battery is low. Charge the case before starting.
- Skipping the 30-second wait after closing the lid, which can leave the pairing half complete.
- Assuming a reset fixes a worn battery or a damaged speaker. It doesn’t.
Recommended Gear
- A soft, lint-free cloth helps keep the case button and charging contacts clean, which can improve how reliably the setup button responds. View on Amazon
- A fitted silicone case protects the charging case from drops that can loosen the button. View on Amazon
FAQ
Will resetting AirPods Pro delete my music or settings?
Your music library lives on your device, so it isn’t affected. Custom settings such as noise control preferences and double-tap actions are erased and must be set up again after pairing.
How do I know the reset is complete?
The status light on the case flashes amber and then white, which signals that the earbuds have cleared their pairing data. They should then appear as a new device when you open the case near your iPhone.
Can I reset only one AirPod Pro?
No, a reset applies to the whole set, including both earbuds and the case. If only one earbud misbehaves, try cleaning it and checking its charge first, and see the guide on how to fix only one AirPod working.
Conclusion
A reset takes about a minute and clears most pairing and connection problems in AirPods Pro. Remove the earbuds from your devices first, hold the case button until the light flashes amber and white, then pair again. If the issue continues, you may be dealing with hardware wear, which a reset cannot fix.

