Updated November 2026
Connecting AirPods to a PC takes about a minute once Bluetooth is turned on and the AirPods are in pairing mode. This guide walks you through the pairing steps on Windows, explains how to choose the right audio output, and covers the most common reasons a connection fails. The steps below apply to most AirPods models, including AirPods 4, AirPods Pro, and AirPods Max.
Before You Start
Pairing goes more smoothly when you confirm a few basics first. Your PC needs Bluetooth hardware, which most laptops have built in. Desktops often need a USB Bluetooth adapter. Check that your AirPods have enough charge, since low battery can make them harder to detect.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
- A Windows PC with Bluetooth turned on (or a USB Bluetooth adapter)
- AirPods charged above a comfortable level, with the lid open or the earbuds in the case
- No other device currently connected to the AirPods (disconnect your iPhone or iPad if needed)
How to Pair AirPods with a Windows PC
- Open Settings, then go to Bluetooth & devices and switch Bluetooth on.
- Click Add device, then choose Bluetooth.
- Open the AirPods case with the earbuds inside. Press and hold the setup button on the back of the case until the status light flashes white.
- Select your AirPods when they appear in the list and wait for the status to show Connected.
Setting the Audio Output
After pairing, Windows may keep sound playing through your speakers. Open the sound menu in the taskbar, click the arrow next to the volume slider, and select the AirPods. Some apps, such as video calling software, have their own microphone and speaker settings, so check those too.
Getting the Microphone to Work
AirPods show up as a stereo output by default, and the microphone often stays off. Windows may list two audio profiles for the same device: a high-quality stereo mode for music and a hands-free mode for calls. Choose the hands-free profile in the sound settings when you need the microphone, and expect audio quality to drop slightly while it is active. This tradeoff is a limit of Bluetooth itself, not a fault in your AirPods.
Troubleshooting a Failed Connection
If the AirPods do not appear in the device list, work through these checks in order:
| Symptom | Likely cause | What to try |
|---|---|---|
| AirPods never appear | Not in pairing mode | Hold the setup button until the light flashes white |
| Paired but no sound | Wrong output selected | Choose AirPods in the sound menu |
| Connects, then drops | Still linked to another device | Disconnect from iPhone or iPad |
| No Bluetooth option | No Bluetooth hardware | Install a USB Bluetooth adapter |
If the problem continues, remove the AirPods from the Bluetooth list, reset them by holding the setup button for about 15 seconds until the light flashes amber then white, and pair again. For more detailed fixes, see AirPods Are Not Connecting? A Step-by-Step Fix Guide and Why Won't My AirPods Connect? 6 Fixes That Work (2026).
Recommended gear
A USB Bluetooth adapter is the most useful addition for desktop PCs that lack built-in Bluetooth, and it is often the quickest route to a working connection. View on Amazon
A short USB-C cable helps when you need to charge the case while you work, so the AirPods stay ready to pair. View on Amazon
Common Mistakes
- Holding the setup button for too short a time, so the case never enters pairing mode.
- Leaving the AirPods connected to a phone nearby, which blocks the PC from connecting.
- Assuming the microphone works without switching to the hands-free profile.
- Forgetting to set the AirPods as the default output in Windows and in your apps.
- Keeping old pairings in the list, which can cause the new connection to fail.
FAQ
Can I connect AirPods to a PC without Bluetooth?
No. AirPods rely on Bluetooth, so the PC needs built-in Bluetooth or a USB Bluetooth adapter.
Why does my PC connect to AirPods but the sound is quiet?
Check both the Windows volume and the volume in the app you are using. The AirPods may also be in a hands-free profile, which lowers audio quality.
Do I need to reset AirPods to pair them with a new PC?
Usually not. Remove the old pairing from the list and put the AirPods in pairing mode again. A reset is only needed if they still will not connect.
Conclusion
Once Bluetooth is on and the AirPods are in pairing mode, connecting to a PC takes only a few clicks. Set the AirPods as your audio output, and switch to the hands-free profile if you need the microphone. If the connection fails, check for a competing device or missing Bluetooth hardware before resetting.

