Updated November 2026
To connect AirPods to an iPad, put the case lid open next to the iPad with Bluetooth turned on, then tap your AirPods when they appear under Bluetooth settings. The whole process usually takes under a minute. If your AirPods don’t show up, the cause is almost always a pairing mode problem, a Bluetooth setting, or a case that’s out of charge.
Before You Start
Make sure your AirPods are charged and your iPad is running a reasonably current version of iPadOS. Keep the AirPods within a few feet of the iPad during pairing. If your AirPods are already paired with an iPhone signed into the same Apple Account, they may appear on the iPad automatically.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
How to Pair AirPods with an iPad
- Open the AirPods case and keep it open, with the AirPods inside.
- On the iPad, go to Settings and select Bluetooth. Turn it on if it’s off.
- Hold the setup button on the back of the case until the status light flashes white. On some models, the light flashes amber first and then white.
- Wait for your AirPods to appear under Other Devices on the iPad.
- Tap your AirPods name and then tap Connect if prompted.
Confirm the Connection
Once connected, the AirPods show “Connected” under their name in Bluetooth settings. Play a short video or music track to check that audio comes through both earbuds. You can also open Control Center on the iPad to confirm the audio output is set to your AirPods.
Pairing When the AirPods Don’t Appear
If nothing shows up after about 30 seconds, the AirPods are probably still connected to another device. Owners often report this happens when an iPhone or Mac sits nearby with the same Apple Account. Disconnect the AirPods from that device, or move it farther away, and then repeat the pairing steps. Restarting the iPad also clears stale Bluetooth connections.
Switching Between Devices
AirPods pair with several Apple devices, but they only play audio from one at a time. To move them to the iPad, open Control Center, tap the audio playback card, and choose your AirPods. You can also start playback on the iPad, and the AirPods will often switch automatically if the other device is idle.
Common Mistakes
- Closing the case lid during pairing, which stops the setup signal.
- Forgetting to hold the setup button long enough. Hold it until the light changes, not just for a quick press.
- Trying to pair while the AirPods are still in another device’s range.
- Assuming the AirPods are broken when the real issue is a low case battery.
FAQ
Why won’t my AirPods show up on my iPad?
The most common cause is that the AirPods are still connected to another nearby device. Disconnect them there, then try the pairing steps again with the case open.
Do I need to reset my AirPods to connect to an iPad?
No. A reset is only needed if the AirPods are stuck or won’t respond to pairing. Try the normal pairing steps first.
Can I use AirPods with an iPad and an iPhone at the same time?
Yes, both can stay paired, but audio plays from only one device at a time. You can switch between them from Control Center or by starting playback on the device you want.
Conclusion
Connecting AirPods to an iPad comes down to opening the case, entering pairing mode, and selecting them under Bluetooth settings. If they don’t appear, disconnect them from nearby devices and check the case battery. Once paired, switching between devices takes just a few taps.

