Updated November 2026
The airpods pro gen 2 is Apple’s second-generation noise-cancelling earbud line, and getting the most from it comes down to three things: knowing which features actually matter, finding an ear tip fit that seals properly, and setting up the controls and firmware correctly. This guide walks through each of those steps so you can tell whether your pair is working as intended or needs a fix.
Know What the airpods pro gen 2 Actually Does
Apple lists active noise cancellation, Transparency mode, Adaptive Audio, and spatial audio with head tracking as the core features on this model. Noise cancellation depends heavily on fit, so the feature set only performs as described when the earbuds sit securely in your ear. If you are comparing models before buying, the overview in Apple AirPods Pro 2 Gen: Features, Fit, and What to Know (2026) covers the feature list in more detail.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
Owners often report that Adaptive Audio and Conversation Awareness are the features they use most, since they adjust noise control automatically and lower media volume when you start talking.
Find the Right Ear Tip Fit
Poor fit is the most common reason people feel the noise cancellation is weak. Apple includes four ear tip sizes (XS, S, M, L) in the box, and the right size should create a light seal without pressure or discomfort.
- Open the Settings app on your iPhone and go to Bluetooth, then tap the info button next to your AirPods.
- Select Ear Tip Fit Test and play the test tone when prompted.
- If the result says the fit is poor, try the next size up or down and run the test again.
- Check the seal by listening for bass response. A noticeable drop in low tones usually means a leak.
If none of the sizes passes, the ear canal shape may simply differ from the average. In that case, a larger or smaller set of tips from a third-party seller is worth trying, though results vary.
Set Up Controls, Modes, and Firmware
After fit, check the controls. Squeezing the stem by default toggles noise control modes, but you can change which mode each squeeze cycles through in the same Bluetooth settings page. Keep the earbuds and case firmware current, since Apple ships noise cancellation and fit improvements through updates.
Checking firmware
Place the earbuds in the case, keep the lid open near your iPhone, and go to Settings, then General, then About, then AirPods. Firmware updates typically install on their own when the case is charging near a connected device.
Troubleshoot Common Problems
| Symptom | Likely cause | What to try |
|---|---|---|
| Weak noise cancellation | Poor seal | Rerun the Ear Tip Fit Test and change tip size |
| Crackling or distortion | Debris in the mesh | Clean the speaker mesh gently with a dry soft brush |
| One earbud quieter | Imbalance or fit difference | Adjust Audio Balance in Accessibility settings |
| Drops from iPhone | Distance or interference | Keep the phone within reach and remove obstacles |
Common Mistakes and Tips
- Skipping the Ear Tip Fit Test and assuming the default size is correct.
- Cleaning the mesh with liquid or pointed objects, which can push debris deeper.
- Leaving the case open or unplugged for long periods, which can drain the buds.
- Ignoring firmware prompts, then wondering why features behave differently.
- Expecting full noise isolation in loud environments without a proper seal.
Recommended gear
A soft dry brush is useful for clearing lint from the speaker mesh without damaging it. View on Amazon
A protective case with a cord loop helps prevent loss and case scratches when you carry the buds daily. View on Amazon
FAQ
Is the airpods pro gen 2 compatible with Android phones?
Some features, including Adaptive Audio and spatial audio with head tracking, require an iPhone or other Apple device. Basic Bluetooth audio works with Android, but you will lose the advanced controls.
How do I know if my airpods gen 2 pro fits correctly?
Run the Ear Tip Fit Test in the Bluetooth settings on your iPhone. A passing result and a strong bass response when you listen both indicate a good seal.
Do I need to update the airpods pro 2 gen firmware manually?
Usually not. Updates install automatically when the case charges near a connected, signed-in device, but you can check the current version under Settings, General, About, AirPods.
Conclusion
The airpods pro gen 2 performs best when the ear tip fit is right, the controls match how you listen, and the firmware is up to date. Work through the fit test first, since most reported problems trace back to seal rather than hardware. If problems persist after these steps, contact Apple Support for a closer look.
Related reading
- Apple AirPods Pro 1st Gen: Setup, Fit and Fixes That Matter
- Airpods Pro 2st Gen: Features, Fit and What to Know Before You Buy
- Airpods Pro 2nd Gen: Features, Fit and Buying Tips That Matter
- Airpods Pro 1st Gen: Which Model Is It and What Fixes Common Problems?
- Where to Get the Right AirPods Pro Replacement and How to Pick It

