Updated November 2026
Apple AirPods 4th gen come in two versions, and the one you pick depends mostly on whether you want active noise cancelling and how much you value a case with a speaker and lanyard loop. This guide walks through the differences, how to set up and pair the earbuds, and the fixes owners most often need. It’s written for anyone deciding between models or trying to get the most from a pair they already own.
Understanding the Two Apple AirPods 4th Gen Models
Apple sells the 4th generation in two configurations. The standard model uses an open, non-silicone fit and focuses on sound quality, Spatial Audio and a faster H2 chip. The version with Active Noise Cancellation adds in-ear sensing and noise control, which blocks more steady background sound such as airplane engines or an air conditioner. Both support Siri, hands-free calls and automatic device switching across Apple devices.
Shopping for one? See our guide: Apple AirPods 3rd Gen Review: Features and Performance.
Neither model has a fit adjustment to change. If you find the open fit loose during exercise, the ANC version’s tips and seal may suit you better, though that depends on your ear shape.
How to Set Up Your AirPods 4th Gen
- Keep the earbuds in the case, open the lid and hold the case near your iPhone, iPad or Mac.
- Tap Connect when the setup card appears. Make sure Bluetooth is turned on.
- Sign in with the same Apple ID used on your device so features like Find My and automatic switching work.
- Update the earbuds’ firmware by leaving them charging in the case near a connected device for about 30 minutes.
- Test Active Noise Cancellation, if your model has it, by holding a finger on the stem and cycling through modes.
Checking Fit and Charging for Best Results
Apple specifies a battery life of roughly 5 hours of listening on a single charge for the earbuds, with additional charges available from the case. Check the battery level by opening the case near your phone. If one bud sounds quieter, clean the mesh openings with a dry brush and confirm the bud is seated fully in your ear.
| Symptom | Likely cause | Fix |
|---|---|---|
| One earbud is quiet | Debris in the speaker mesh | Brush the mesh gently and retest |
| Frequent dropouts | Distance or interference | Keep the source device within sight and reconnect |
| Won’t pair with new device | Still linked to old Apple ID | Remove the device from Bluetooth settings and re-pair |
Common Mistakes to Avoid
- Assuming the ANC model blocks all sound. It reduces steady, low-frequency noise far more than sudden sounds like voices.
- Skipping firmware updates, which can affect connection stability and ANC performance.
- Storing the case with the lid open, which drains the battery faster.
- Choosing by generation alone. Earlier AirPods models may still suit you if you don’t need the 4th gen features.
Recommended gear
A soft cleaning brush helps keep the speaker mesh clear, which matters for both sound and noise control.
View on Amazon
A slim protective case keeps the charging case from scratching and helps protect the lid hinge from drops.
View on Amazon
FAQ
Do the two AirPods 4th gen models have the same battery life?
Apple lists similar listening times for both, but ANC use reduces battery life somewhat. Check the battery in the case before long trips.
Can I use AirPods 4th gen with Android?
They pair over standard Bluetooth, but features like automatic switching, Find My and Spatial Audio work best with Apple devices.
Why does my right earbud sound quieter than the left?
Debris in the mesh is the most common cause. Clean it gently, then check the volume balance in your device’s accessibility settings.
Conclusion
Apple AirPods 4th gen offer a clear choice between the standard and ANC models, and setup takes only a few minutes. Keep the firmware updated and clean the speaker mesh regularly to avoid most issues. For problems that persist after these steps, contact Apple Support.

