Updated November 2026

If you own an apple airpods pro 1st generation pair, you can get them paired, fitted and sounding right in about fifteen minutes. This guide covers how to confirm your model, set up the earbuds on an iPhone or other device, get a secure fit for noise isolation, and fix the issues owners report most often. For a deeper look at fit and troubleshooting, see Apple AirPods Pro 1st Gen: Setup, Fit and Fixes That Matter.

Confirm You Have the 1st Generation Model

The first generation is easy to mix up with later versions because the case looks similar. Check the back of the charging case or the model listing in your Bluetooth settings. The 1st generation shows a model number beginning with A2084 for the earbuds and A2190 for the case, depending on the regional variant. Later models have a wireless charging case in the same shape, so the model number is the most reliable check. If you are comparing against newer releases, Apple AirPods Pro 2nd Generation Review: Is It Worth It? explains the main differences.

Set Up Your Apple AirPods Pro 1st Generation

Pairing takes less than a minute when everything is working correctly. Open the case near an unlocked iPhone running a current iOS version, then tap Connect when the setup card appears. Keep the case open and the earbuds inside while the phone finishes setup.

  1. Open the case next to your iPhone and wait for the setup animation.
  2. Tap Connect and wait for the Done button.
  3. Sign in with the same Apple ID used on your iPhone so your settings sync.
  4. Go to Settings, then Bluetooth, tap the info icon beside your AirPods and confirm the firmware is current.
  5. Test both earbuds by playing audio and switching between them.

Check Firmware Before You Test Anything Else

Many reported problems, including dropouts and mismatched volume, clear up after a firmware update. Keep the earbuds in the case, connected to power, and near the phone overnight. Updates install automatically when those conditions are met.

Get a Secure Fit for Noise Isolation

Noise cancellation depends heavily on the seal inside your ear. The 1st generation ships with three ear tip sizes, and most people find that one size produces a clearly better seal than the others. Insert each earbud, twist slightly, then pull gently on the outer edge of your ear. If the earbud stays put and bass sounds fuller, the fit is probably right. If the seal feels loose, try the next size up or down. For aftermarket tips that can improve seal, see 5 Best Apple AirPods Pro Ear Tips for Secure Fit and Noise Isolation (2026).

Troubleshoot the Most Common Problems

Owners most often report one earbud being quieter than the other, sudden disconnects, and a case that will not charge. Each has a short fix that is worth trying before assuming a hardware fault. Start with the simplest step and work down the list.

Symptom Likely cause First fix
One earbud is quieter Debris in the speaker mesh or uneven seal Clean the mesh with a dry brush and reseat the tip
Frequent disconnects Interference or outdated firmware Update firmware and move away from microwaves and Wi-Fi routers
Case will not charge Dirty charging contacts or a weak cable Clean the contacts and try a different cable and outlet
Mic sounds muffled Wax or lint on the mic openings Gently clean the openings with a dry cotton swab
  • Soft-bristle cleaning brush helps clear lint and earwax from the speaker mesh without pushing debris deeper. View on Amazon
  • Replacement silicone ear tips can restore a seal when the original tips have stretched or hardened over time. View on Amazon

Common Mistakes to Avoid

  • Cleaning the speaker mesh with a wet cloth or compressed air at close range, which can push debris further in.
  • Assuming a quiet earbud is broken before checking the seal and mesh.
  • Skipping firmware updates, which often fix connection and audio balance issues.
  • Storing the earbuds in a hot car, which can degrade the battery over time.
  • Using a non-matching charging cable that does not deliver steady power.

FAQ

How do I know if my AirPods Pro are the 1st generation?

Check the model number on the back of the case or in your Bluetooth settings under the device info screen. The 1st generation earbuds use the A2084 model number, while later versions use different identifiers.

Why does one earbud sound quieter than the other?

This is usually caused by debris in the speaker mesh or an uneven fit in the ear. Clean the mesh gently with a dry brush and try reseating each earbud before assuming a hardware fault.

Do I need to update the firmware on my AirPods Pro?

Yes, keeping firmware current helps with connection stability and audio balance. Keep the earbuds in the case, charged and close to your iPhone so updates can install automatically.

Conclusion

Setting up an apple airpods pro 1st generation pair is straightforward once you confirm the model and keep firmware current. A proper ear tip fit does most of the work for noise isolation, and most common problems respond to cleaning and updates. If issues continue after these steps, contact Apple support for further help.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.