Updated November 2026
The Apple AirPods Pro 2nd gen are Apple’s second-generation noise-cancelling earbuds, and getting the most from them comes down to three things: a secure fit, correct settings, and knowing which problems are normal and which need a fix. This guide walks through each one so you can set up your pair properly and troubleshoot quickly if something feels off.
Check the Fit Before You Rely on Noise Cancelling
Noise cancellation depends on a tight seal in your ear canal. If the seal is loose, bass drops out and outside sound leaks in, which makes the feature seem weaker than it is. Apple includes silicone tips in several sizes, and owners often report that the medium or small tip is the right match for most ears.
- Open the Settings app on your iPhone and go to Bluetooth, then tap the info icon next to your AirPods Pro.
- Select Ear Tip Fit Test and play the test sound.
- If the result says the fit is poor, try the next size up or down and repeat the test.
- Gently push each earbud into your ear and rotate slightly until it sits flush.
If none of Apple’s tips seal well, third-party ear tips are another option. For more on sizing and alternatives, see 5 Best Apple AirPods Pro Ear Tips for Secure Fit and Noise Isolation (2026). If you want more background, see Are Apple Earbuds Waterproof? IP Ratings for AirPods and Limits.
Set Up Noise Cancellation and Transparency Modes
The second-generation model offers Active Noise Cancellation, Transparency mode and Adaptive Audio, which blends the two based on your surroundings. You can switch between them quickly from the stem or from Control Center on your iPhone.
- Active Noise Cancellation: best for flights, trains and busy offices.
- Transparency: lets voices and traffic through so you stay aware of your surroundings.
- Adaptive Audio: a good default if you move between quiet and noisy places often.
Press and hold the stem to cycle through modes. Make sure you have set the mode you prefer under Settings, then AirPods Pro, so the stem gesture does what you expect.
Update Firmware and Confirm Connectivity
Many reported issues, including dropouts and uneven volume between earbuds, are resolved by a firmware update. Keep the earbuds in the case, near your iPhone and charging, and they will update automatically. You can check the version under Settings, then General, then About, then your AirPods.
Quick Connectivity Checklist
- Keep your iPhone or iPad updated to the latest iOS or iPadOS release.
- Sign in with the same Apple ID on every device you want to use.
- Reset the earbuds if they stay stuck on the wrong device: hold the setup button on the case until the light flashes amber, then white.
Charging and Case Care
The case charges the earbuds and keeps them protected, so a clean case and a clean connection matter. Lint and earwax can build up in the speaker mesh and on the charging contacts, and that buildup often causes low volume or weak charging. Use a dry, soft brush and avoid pushing anything into the mesh.
Apple specifies that the case uses wireless charging with Qi-compatible pads and Lightning or USB-C for wired charging, depending on the version you own. Keep the case out of direct heat, since high temperatures can shorten battery life over time.
Recommended Gear
- A soft-bristle cleaning brush helps clear lint and earwax from the speaker mesh without damaging it. View on Amazon
- Replacement silicone ear tips give you a backup if one size stops sealing well. View on Amazon
Common Mistakes
- Skipping the fit test and assuming the default tip is correct.
- Leaving the earbuds out of the case for long periods without charging.
- Cleaning the speaker mesh with sharp tools or liquids.
- Expecting Transparency mode to block sound the way Active Noise Cancellation does.
- Ignoring firmware updates when you notice dropouts or uneven sound.
FAQ
Why does noise cancellation seem weak on my AirPods Pro 2nd gen?
The most common cause is a poor seal. Run the Ear Tip Fit Test in Bluetooth settings and try a different tip size if the result is poor.
How do I reset my AirPods Pro 2nd gen?
Place the earbuds in the case, hold the setup button on the back until the status light flashes amber and then white, and reconnect from your device.
Can I use the AirPods Pro 2nd gen with an Android phone?
They pair over Bluetooth, but features such as the stem gestures, Adaptive Audio and automatic switching work best with Apple devices. Check Apple AirPods Pro 2nd Generation Review: Is It Worth It? for a fuller picture of compatibility.
Conclusion
A correct fit, the right listening mode and up-to-date firmware solve most problems with the Apple AirPods Pro 2nd gen. Run the fit test first, keep the case clean, and check for updates before assuming something is broken. For model comparisons and buying advice, explore Apple AirPods Pro 2 Gen: Features, Fit, and What to Know (2026).

