Updated November 2026
Connecting Beats headphones takes about a minute once you know the pairing sequence. You put the headphones into pairing mode, select them from your phone, laptop or tablet, and confirm the connection. This guide covers how to connect Beats headphones to iPhone, Android and Windows, plus what to do when the device doesn’t show up in the list.
Before You Start: What You Need
Pairing depends on a few basics. Check these first so you don’t waste time troubleshooting the wrong thing.
Shopping for one? See our guide: 9 Best Beats Headphones Wireless Rose Golds Compared.
- Your Beats headphones charged to at least 30 percent, or plugged in while pairing.
- Bluetooth turned on for the device you’re connecting to.
- The headphones not already connected to another phone or laptop nearby.
- Your device running a reasonably current operating system.
How to Connect Beats Headphones to an iPhone or iPad
Apple devices use a fast pairing prompt for many Beats models. Open the lid of the charging case or hold the headphones near the device, then tap Connect when the card appears on screen. If no card appears, use the manual method below.
Manual pairing steps
- Turn the headphones off, then press and hold the power button until the status light flashes.
- On your iPhone, go to Settings, then Bluetooth, and make sure Bluetooth is on.
- Under Other Devices, tap your Beats model when it appears.
- Wait for the status to change to Connected. The headphones will play a short tone when they link up.
How to Connect to Beats Headphones on Android
Android handles pairing through the Bluetooth menu, though the exact labels vary by manufacturer. Look for Connected devices or Bluetooth in your settings.
- Put the headphones into pairing mode by holding the power button until the light flashes.
- Open Settings, go to Connected devices or Bluetooth, and tap Pair new device.
- Select your Beats model from the list.
- If prompted for a passcode, try 0000 first.
How to Connect Beats Headphones to a Windows PC or Laptop
On Windows, open Settings, select Bluetooth & devices, and turn Bluetooth on. Click Add device, choose Bluetooth, and select your headphones once they appear. Owners often report that the headphones show up as two entries, a headset and a stereo option. Choose the stereo entry for music and video, since the headset profile lowers audio quality for calls.
Fixing a Beats Headphone That Won’t Connect
When pairing fails, the cause is usually an old saved connection. Forget the device on your phone or computer, reset the headphones, then pair again from scratch. Manufacturers generally describe a reset as holding the power and volume controls together for about 10 seconds until the light changes. Confirm the exact reset steps for your model in the printed guide or on Beats support pages.
For more detail on Bluetooth pairing failures, see How to Fix Bluetooth Headphones That Won’t Pair. If the connection drops during calls, How to Fix a Headphone Microphone That No One Hears covers microphone settings that often cause the problem.
Common Mistakes
- Pairing while the headphones are still linked to another device nearby.
- Skipping the forget step, which keeps an outdated connection in memory.
- Choosing the headset profile on a computer and then wondering why music sounds thin.
- Leaving the headphones in pairing mode for too long, which times out and forces a restart of the process.
- Pairing with the case lid closed. Open it first, or hold the headphones close to the device.
Recommended Gear
A few accessories make pairing and everyday use easier. A USB-C charging cable keeps the battery topped up so pairing doesn’t fail on low power. View on Amazon
A protective carrying case keeps the headphones and their charging case from getting scratched or crushed, which helps prevent hinge and button damage that can interfere with the power controls. View on Amazon
FAQ
Why won’t my Beats headphones show up in the Bluetooth list?
The headphones are probably not in pairing mode, or they’re still connected to another device. Turn them off, hold the power button until the light flashes, and try again with the other device disconnected.
Can I connect Beats headphones to two devices at once?
Some newer Beats models support multipoint, which lets them stay linked to two devices. Check your model’s specifications, since older models generally connect to one device at a time.
Do I need to reset my Beats headphones before pairing?
Not always. Reset them only if pairing fails repeatedly after you forget the device on your phone or computer. Consult the official Beats support documentation for your specific model before performing a reset.
Conclusion
Most Beats connection problems come down to pairing mode, a stale saved device, or the wrong Bluetooth profile on a computer. Work through the steps for your device in order, and forget the headphones before reconnecting if anything goes wrong. Once paired, the headphones should reconnect automatically the next time you power them on nearby.

