Owen PalmerBy Owen Palmer

Updated November 2026

The beats solo 4 on ear wireless headphones are light, simple to pair, and built for everyday listening. This guide walks you through pairing them with your phone or laptop, adjusting the fit so they stay comfortable for hours, and fixing the issues owners run into most often. Follow the steps in order and you should have a stable connection and a seal that holds up on the move.

Step 1: Charge and Pair the Headphones

Charge the headphones with the included USB-C cable before first use. Manufacturers specify a quick charge that gives several hours of playback, so a short top-up is enough if you are in a hurry. Once charged, press and hold the power button until you hear the pairing prompt, then select the headphones from your device’s Bluetooth menu.

Shopping for one? See our guide: 9 Best Beats Headphones Wireless Rose Golds Compared.

  1. Turn off Bluetooth on any other device that might grab the connection.
  2. Hold the power button until the indicator signals pairing mode.
  3. Select the headphones in your phone or laptop Bluetooth list.
  4. Confirm the connection with a short test track before walking away.

Step 2: Set Up Your Device and Controls

Once paired, install the Beats app if you want to adjust settings like listening modes or firmware updates. Many owners find the on-ear controls take a day or two to feel natural, so practice play, pause, skip, and volume on the right ear cup before relying on them in traffic. The app also lets you check battery level, which is easier than guessing from the indicator light.

Step 3: Adjust the Fit for Comfort and Sound

On-ear headphones sit on your outer ear rather than around it, so fit matters more than seal depth. Slide the headband so the cushions rest flat on the ear without pressing on the cartilage. If the bass feels thin, the cushions are likely sitting slightly off-center, and a small rotation or shift usually restores the low end.

Check the Clamping Force

Good on-ear headphones should feel secure when you shake your head gently, but they should not pinch. If the clamp is too tight after an hour, gently bend the headband wider with both hands in short increments, checking the fit after each adjustment.

Common Problems and How to Fix Them

Problem Likely cause Fix
Won’t pair Device still linked to another source Forget the headphones on all devices, then re-pair
Audio cuts out Distance or interference Keep the source device within a few feet and clear of metal objects
Thin bass Cushions off-center Reseat the headphones on your ears
Short battery life Heavy volume or old battery Lower volume and check battery health in the app

If problems continue after these steps, a reset is usually the next move. For deeper troubleshooting, see Beats Solo 4 Headphones: Setup, Features, and Fixes Explained (2026).

Common Mistakes

  • Pairing while another device is still connected, which often causes the headphones to connect to the wrong source.
  • Wearing them at high volume for long stretches, which drains the battery faster and can strain your hearing.
  • Skipping firmware updates, which sometimes fix connection drops.
  • Tightening the headband too far, which causes pressure soreness after extended use.

A soft carrying case protects the ear cups and headband when you commute or travel. View on Amazon

A short USB-C cable kept at your desk makes topping up the battery quick and easy. View on Amazon

FAQ

Why won’t my beats solo 4 on ear wireless headphones connect to my phone?

The headphones are most likely still linked to another device or are not in pairing mode. Forget them in your Bluetooth list on all devices, then hold the power button until the pairing prompt appears.

How long should I wear on-ear headphones at a time?

Many owners take a short break every hour or so to reduce pressure on the ears. Keep the volume moderate, since loud listening is a bigger concern for hearing than comfort alone. A healthcare professional can advise you if you notice ear pain or hearing changes.

Can I use the headphones while charging?

Manufacturers generally recommend using wired playback only where the model supports it, so check the product documentation first. For wireless use, it is usually best to finish charging before listening for long periods.

Conclusion

Pairing, fit, and a few quick checks cover most of what you need to get the beats solo 4 on ear wireless headphones working well. Adjust the fit gradually, keep your devices unlinked during setup, and update firmware when prompted. With those basics in place, troubleshooting becomes a short fix rather than a frustrating search.

Ready to choose one?

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.