Updated November 2026

To connect Bose wireless headphones, you put them into pairing mode, then select them from your device’s Bluetooth menu. Most models take under two minutes once you know which button to hold and what the status light should do. This guide covers the general process that works across most Bose wireless models, along with the checks that resolve pairing failures.

Before You Start

Charge the headphones first. Low battery can cause the pairing process to stall or drop, and many owners report that a partial charge is enough to cause confusion. Also make sure the device you want to pair with has Bluetooth turned on and is close to the headphones, ideally within a few feet.

Shopping for one? See our guide: 7 Best Bose Free Wireless Headphones Compared (2026).

How to Put Bose Headphones Into Pairing Mode

Pairing mode is the step most people get wrong. Power the headphones off, then press and hold the Bluetooth button (on some models, the power button) until you hear a voice prompt or see the status light flash. The light usually alternates between blue and white on newer models. Manufacturers specify that the headphones stay in pairing mode for a few minutes, so you have time to finish the next step.

How to Select Your Bose Headphones on Your Device

Open the Bluetooth settings on your device and wait for the Bose model name to appear in the list of available devices. Select it and confirm the connection if prompted. Once paired, the headphones usually announce that they are connected. If you have paired them before with a different device, you may need to disconnect that device first, since most Bose models connect to one active source at a time.

Pairing Checklist

  1. Charge the headphones to at least a partial charge.
  2. Turn Bluetooth on your phone, tablet, or computer.
  3. Power off the headphones, then press and hold the Bluetooth button until the pairing prompt sounds.
  4. Select the Bose model name from the device list.
  5. Test audio by playing a short video or song.

Connecting Bose Headphones to Multiple Devices

Many Bose models store several paired devices in memory and can switch between them. To connect to a second device, pair it the same way, then press the power or Bluetooth button to make the headphones reconnect. If the headphones keep connecting to the wrong device, turn off Bluetooth on the device you do not want, or remove it from the headphones’ paired list in your phone’s app. For a broader walkthrough, see How to Pair Bose Wireless Headphones: A Step-by-Step Guide (2026).

Common Mistakes

  • Holding the button only briefly. A short press usually powers the headphones on or off instead of starting pairing mode.
  • Pairing while the headphones are still connected to another device.
  • Forgetting that a stale pairing record can block a new connection. Forgetting the headphones on the old device often fixes this.
  • Waiting too long after the pairing prompt. Pairing mode times out, so start the device search right away.
  • Skipping a firmware update. Bose’s companion app can install updates that improve connection stability.
  • A quality USB-C charging cable helps keep the battery topped up so pairing does not fail on low power. View on Amazon
  • A protective carrying case keeps the headphones from being damaged in transit, which can affect the Bluetooth antenna. View on Amazon

FAQ

Why won’t my Bose headphones show up in the Bluetooth list?

The headphones are probably not in pairing mode, or they are still connected to another device. Turn them off, hold the Bluetooth button until the prompt sounds, and try again.

Can I connect Bose headphones to a laptop and a phone at the same time?

Many Bose models support two devices at once, though audio usually plays from only one at a time. Check your model’s manual to confirm multipoint support.

What should I do if pairing still fails?

Reset the headphones, clear old pairings from your device, and restart the device. If problems continue, contact Bose support for hardware help.

Conclusion

Connecting Bose wireless headphones comes down to entering pairing mode and selecting the model on your device. Keep the headphones charged, clear old pairings, and hold the button long enough to trigger the prompt. For model-specific steps, browse Bose Headphones How to Connect: A Step-by-Step Guide (2026) and Why Won't My Bose Headphones Connect? 6 Fixes That Work (2026).

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.