Updated November 2026
Connecting Bose headphones to a Mac takes about a minute once they are in pairing mode. You will pair them through Bluetooth, confirm them as the sound output, and handle the few settings that most often cause problems. The steps below cover current Macs running recent versions of macOS.
Put Your Bose Headphones in Pairing Mode
Most Bose models enter pairing mode when you hold the Bluetooth button until a voice prompt says “Ready to connect” or the status light starts flashing. On many over-ear models, the button is on the right earcup, while some newer models use the power button for this. Check the label or the quick start guide that came in the box if you are unsure.
Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).
If the headphones were previously paired with a phone or another laptop, they may try to reconnect to that device first. Turn off Bluetooth on those devices or hold the pairing button long enough to clear the connection.
Pair the Headphones in macOS
- Click the Apple menu and open System Settings.
- Select Bluetooth in the sidebar. Make sure the toggle is on.
- Wait for your Bose model to appear under Nearby Devices.
- Click Connect next to the headphone name. The status should change to Connected within a few seconds.
If the headphones do not appear, keep them within about 3 feet of the Mac and confirm they are still flashing or announcing pairing mode. Restarting Bluetooth from the Control Center menu bar icon often helps.
Set Bose as the Sound Output
Pairing alone does not always route audio to the headphones. Open System Settings, choose Sound, and select your Bose headphones under Output. You can also hold the Option key and click the volume icon in the menu bar to switch outputs quickly.
Some apps, such as video calling software, keep their own input and output settings. Check those inside the app if you hear audio from the Mac speakers instead of the headphones.
Connecting Bose Headphones to Mac Over Multiple Devices
Many current Bose models can stay paired with more than one device at a time. If you use the headphones with a phone as well, switching may require you to start playback on the Mac or pause on the other device. Owners often report that audio switches more smoothly when the other device is set to disconnect or turned off Bluetooth temporarily.
If you only need occasional use, you can also remove the Mac from the headphone list in Bluetooth settings. This prevents accidental reconnection. For a full walkthrough of removing a pairing, see How to Unpair Bose Headphones: A Step-by-Step Guide (2026).
Common Mistakes
- Forgetting to select the headphones in the Sound output list, even though they are connected.
- Leaving the headphones paired to an old device that keeps grabbing the connection.
- Letting the headphone battery run low, which can cause dropouts and weak connections.
- Trying to pair while the headphones are still connected to another source, so they never enter pairing mode.
- Assuming a sound problem is the headphones when the app’s own audio output setting is wrong.
Recommended gear
- USB-C to 3.5mm audio cable: useful if your Bose model supports a wired connection and you want a backup when Bluetooth is unreliable. View on Amazon
- USB-C charging cable: keeps the headphones charged, which helps avoid connection drops mid-session. View on Amazon
FAQ
Why won’t my Bose headphones show up on my Mac?
The headphones usually need to be in pairing mode and close to the Mac. Make sure Bluetooth is on in System Settings and that the headphones are not still connected to another device.
Why do I hear sound from my Mac speakers instead of the headphones?
Your Mac may still be set to use its built-in speakers as output. Open the Sound settings and select the Bose headphones, then check the app you are using for its own output setting.
Can I use Bose headphones with a Mac and a phone at the same time?
Many multipoint-capable Bose models can connect to two devices, but only one usually plays audio at a time. Pausing playback on one device before starting on the other usually switches the audio cleanly.
Conclusion
To connect Bose headphones to a Mac, put the headphones in pairing mode, pair them in Bluetooth settings, and select them as the sound output. Most problems come from the wrong output setting or an old pairing still active on another device. Clearing those two issues fixes most connection trouble.

