Updated November 2026

To connect AirPods to a computer, put the case lid open next to your machine, press and hold the setup button until the status light flashes white, and then choose your AirPods from the computer’s Bluetooth menu. The process takes under two minutes on most Windows PCs and Macs. This guide covers both systems and the checks that prevent the most common failures.

Before You Start

Confirm that your computer has Bluetooth. Most laptops include it, but many desktops do not, and a small USB Bluetooth adapter will fix that. Also make sure your AirPods have some charge, since a nearly empty case can stall the pairing process.

Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.

  • Bluetooth enabled on the computer
  • AirPods charged, with the lid open
  • AirPods not currently paired to another device that is nearby and active

How to Connect AirPods to a Windows PC

  1. Open Settings, then go to Bluetooth & devices and switch Bluetooth on.
  2. Click Add device, then choose Bluetooth.
  3. Place the AirPods in the open case and press and hold the setup button on the back until the status light flashes white.
  4. Select your AirPods from the list. Windows will confirm once the connection is complete.

After pairing, open the sound settings and check that the AirPods appear as the output device. Windows sometimes lists them as a headset profile, which lowers audio quality for music. Switching the output to the stereo option fixes this.

How to Connect AirPods to a Mac

  1. Click the Apple menu, open System Settings, and select Bluetooth.
  2. Make sure Bluetooth is turned on.
  3. Open the AirPods case with the lid up and press the setup button on the back until the light flashes white.
  4. When your AirPods appear under Nearby Devices, click Connect.

Apple’s pairing uses the same Apple ID as your iPhone or iPad if you are signed in to iCloud, so AirPods may appear automatically on nearby Apple devices. You can then choose the Mac from the audio menu in the top bar.

Choosing the Right Audio Output

Once connected, you still need to tell the computer to send sound to the AirPods. On a Mac, hold the Option key and click the volume icon in the menu bar, then pick your AirPods. On Windows, open the sound menu in the taskbar and choose them from the list. If the AirPods show as connected but produce no sound, the output device is usually still set to the built-in speakers.

Common Mistakes

  • Pressing the setup button while the lid is closed, which does nothing useful.
  • Holding the button too briefly. Hold it until the light flashes, not just blinks once.
  • Forgetting that a previously paired phone may reconnect first and block the computer.
  • Leaving the AirPods in the case with the lid closed for too long during setup.
  • Assuming a desktop without Bluetooth is broken, when a USB adapter solves the problem.
  • A USB Bluetooth adapter helps desktops without built-in wireless connect to AirPods. View on Amazon
  • A short USB-C charging cable keeps the case charged during setup and daily use. View on Amazon

FAQ

Why won’t my AirPods show up on my computer?

The AirPods may still be connected to another nearby device. Disconnect them from your phone or tablet, then repeat the pairing steps with the lid open.

Can I connect AirPods to a computer without Bluetooth?

Not directly. You need a Bluetooth adapter that plugs into a USB port, which works on most Windows PCs and Macs.

Do I need to pair again after restarting the computer?

Usually not. Once paired, AirPods typically reconnect automatically when they are in range and the case is open.

Conclusion

Pairing AirPods to a computer takes only a few steps once Bluetooth is on and the setup button is held until the light flashes. Set the correct audio output afterward, and check for other nearby devices if the connection fails. If problems continue, a guide on fixing AirPods that won’t connect can help you troubleshoot further.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.