Updated November 2026
Connecting AirPods Pros takes about a minute on an iPhone, and the same basic process works on most other devices with a few small differences. This guide walks through how to connect AirPods Pro to an iPhone, Android phone and computer, how to get them back into pairing mode when a connection fails, and how to fix the most common problems. Whether you have AirPods Pro 2 or the newer AirPods Pro 3, the core steps are the same.
What You Need Before You Start
Before pairing, check that the basics are in place. Pairing is much more reliable when the earbuds have some charge and nothing else is competing for the connection.
Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.
- AirPods Pro in their charging case, with at least some battery remaining in the case or the earbuds
- Bluetooth turned on for the device you are connecting to
- Your device running a reasonably current operating system
- No other nearby device that is actively trying to connect to the same earbuds
How to Connect AirPods Pro to an iPhone or iPad
On Apple devices, pairing is largely automatic. Open the lid of the case while holding it near your unlocked iPhone or iPad. A setup card should appear within a few seconds.
- Tap Connect on the pop-up card.
- If no card appears, go to Settings > Bluetooth and check whether the AirPods are listed under nearby devices.
- Tap the AirPods name to pair them manually if needed.
- Confirm that the AirPods appear under My Devices with a connected status.
Once paired with an Apple ID, the earbuds usually show up on other Apple devices signed into the same account. This is the simplest route for anyone who wants to switch between an iPhone, iPad and Mac without repeating the setup.
How to Connect AirPods Pro to an Android Phone or Windows PC
Non-Apple devices need manual pairing, which takes a few more steps. The earbuds must be in pairing mode before the phone or computer can find them.
- Open the lid of the case and keep it open.
- Press and hold the setup button on the back of the case until the status light flashes white.
- On your Android phone, go to Settings > Connected devices > Pair new device, then select the AirPods from the list.
- On Windows, go to Settings > Bluetooth & devices > Add device > Bluetooth, then choose the AirPods.
Expect slightly different menu names depending on your manufacturer and Windows version. The key step is the flashing white light, which tells the earbuds to advertise themselves to nearby devices.
How to Reconnect AirPods Pro After a Failed Pairing
If the earbuds stop connecting or a previous pairing is stuck, reset the connection and start again. Remove the old entry first so the device does not try to use outdated pairing data.
- Forget the AirPods in your device’s Bluetooth settings.
- Place both earbuds in the case and close the lid for about 30 seconds.
- Open the lid and repeat the pairing steps for your platform.
Owners often report that this reset fixes most stubborn cases, especially when one device previously paired with the earbuds and the new device cannot see them. If the earbuds still won’t appear, a full reset may be needed. Consult Apple support for guidance on resetting the hardware.
Common Mistakes to Avoid
- Forgetting to hold the setup button long enough. The light must flash white, not just turn on.
- Trying to pair while the earbuds are still connected to another phone nearby.
- Leaving the case lid closed during manual pairing. The lid needs to stay open.
- Skipping the forget step, which can leave outdated pairing data behind.
- Assuming a connection problem is always the earbuds. Low battery or a crowded Bluetooth environment can cause the same symptoms.
Recommended Gear
A few accessories make everyday use and storage easier, especially if you carry the earbuds often.
- A protective case helps guard the charging case against drops and scratches. View on Amazon
- A charging cable of known quality avoids the frustration of a loose connection that interrupts charging. View on Amazon
FAQ
Why won’t my AirPods Pro show up on my phone?
The earbuds may not be in pairing mode, or they may still be paired with another device nearby. Put them back in the case, close the lid, then reopen it and try again with the setup button held until the light flashes.
Can I connect AirPods Pro to two devices at once?
The earbuds can only actively stream audio to one device at a time, though they can remain paired with several. They switch between paired devices as you start audio on each one.
Do I need an Apple ID to connect AirPods Pro?
No. You can pair them with any Bluetooth device without an Apple ID. An Apple ID is only needed for automatic syncing across Apple devices and for certain features.
Conclusion
On an iPhone, AirPods Pro connect with a single tap on the setup card. Android phones and Windows computers need manual pairing with the setup button held until the light flashes. If something goes wrong, forget the old connection and try again from the case.
Related reading
- Where to Get the Right AirPods Pro Replacement and How to Pick It
- Newest AirPods Pro 3: What's New and How to Choose the Right Setup (2026)
- How to Connect AirPods with Android: A Step-by-Step Guide (2026)
- How to Connect AirPods to Laptop: A Step-by-Step Guide (2026)
- How to Connect AirPods to Chromebook: 5 Steps That Work (2026)

