Updated November 2026

To put AirPods into pairing mode, you open the charging case with both earbuds inside and press and hold the setup button on the back until the status light flashes white. Once the light pulses, the earbuds are discoverable and your phone, tablet, or computer can find them in its Bluetooth list. The steps are nearly the same across AirPods generations, with small differences in where the button sits and what the light does.

Before You Start: Charge and Clear the Case

Pairing mode only works when the earbuds have enough power and are not still linked to another device. Manufacturers specify that the earbuds should be charged or placed in the case, which charges them while you work. Make sure the lid is open during the process, since the setup button is only reachable from the outside of the case, and the status light is visible from the front.

Shopping for one? See our guide: AirPods Pro 3 Case Review: Features, Pros and Cons.

Steps to Enter Pairing Mode on AirPods

  1. Place both AirPods in the charging case and keep the lid open.
  2. Locate the round setup button on the back of the case, below the hinge on most models.
  3. Press and hold the button until the status light flashes white. On some models the light sits inside the case, so look closely.
  4. Open your iPhone, iPad, Mac, or Android device and go to its Bluetooth settings.
  5. Select the AirPods from the list of nearby devices and confirm the connection.

If you are working with AirPods Max, the process is different. You press the noise control button and the Digital Crown together until the status light flashes. Our guide on How to Pair AirPods Max: Step-by-Step for iPhone, Mac, and Android covers that model in detail.

Pairing Mode Differences Across AirPods Models

Each generation handles the status light a little differently, and that affects how you know the earbuds are ready. Use the table below as a quick reference.

Model Setup button location Light that signals pairing
AirPods (1st and 2nd generation) Back of the case White flashing light
AirPods Pro (1st and 2nd generation) Back of the case White flashing light
AirPods (3rd generation) Back of the case White flashing light

For a deeper look at the newest version, see AirPods Pro 3 Pairing Mode: How to Put Them in Pairing Mode.

Troubleshooting When AirPods Won’t Enter Pairing Mode

If the light does not flash, the most common cause is a low battery in the earbuds or the case. Place the AirPods back in the case, close the lid, wait about 15 minutes, then try again. If the earbuds still refuse to pair, reset them by holding the setup button until the light flashes amber and then white. Owners often report that one earbud stops responding after a reset, which usually means it needs to be reconnected to the case.

When one earbud keeps dropping out after pairing, the problem is usually not pairing mode itself. The guide Only One AirPods Is Working? How to Fix It in 7 Steps walks through those fixes.

Common Mistakes

  • Pressing the button with the lid closed, which prevents the light from showing.
  • Holding the button for too short a time, which often just triggers a status blink.
  • Forgetting to remove the AirPods from another device’s Bluetooth list first.
  • Starting the process with a nearly empty case, which can make the light flicker or fail.
  • Keeping the earbuds too far from the device during pairing; keep them within a few feet.
  • Apple AirPods charging case replacement: useful if the setup button on your original case has stopped responding. View on Amazon
  • Apple USB-C charging cable: a reliable cable keeps the case charged so the earbuds have enough power to enter pairing mode. View on Amazon

FAQ

Why won’t my AirPods show up on my phone?

Usually the earbuds are still connected to another device or the light never started flashing. Forget the AirPods on the other device, then repeat the case button steps.

How long should I hold the setup button?

Hold it until the status light flashes white, which typically takes several seconds. Releasing it early often produces only an amber blink.

Do I need to reset AirPods to pair them again?

Not always. A reset is only needed if the earbuds will not enter pairing mode, and it clears all saved connections.

Conclusion

Putting AirPods into pairing mode comes down to opening the case, holding the setup button until the light flashes white, and selecting them from your device’s Bluetooth list. If the light does not respond, charge the case and try a reset. For model-specific steps, check the related guides linked above.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.