Updated November 2026

To reset Bose Quiet Comfort headphones, you clear their saved Bluetooth connections and restore them to factory settings. This fixes most problems with pairing, audio dropouts and buttons that stop responding. The process takes about a minute on most models, though the exact button combination varies slightly by generation.

Before You Reset: Check the Basics

Many headphone problems come from the device rather than the headphones, so rule these out first. Charge the headphones for at least 15 minutes, since a very low battery can cause odd behavior. Then confirm your phone or laptop has Bluetooth turned on and that the headphones are not still paired to another device nearby. If you plan to use the headphones with a new device, clear them from the old one as well. Our guide on How to Unpair Bose Headphones explains that step in detail.

Shopping for one? See our guide: Bose Quiet Comfort Headphones Buttons: 3 Best Replacement Parts for Repair.

How to Reset Bose Quiet Comfort Headphones

The reset method depends on which generation you own. Most Quiet Comfort models use one of the two approaches below.

Method 1: Power Button Reset (Most Models)

  1. Make sure the headphones are turned off.
  2. Press and hold the Bluetooth button (or the power button on older units) for about 10 seconds.
  3. Wait for the LED or voice prompt to indicate the reset is complete. Some models announce that the headphones are ready to pair.
  4. Release the button and turn the headphones back on.

Method 2: Combined Button Reset

On certain models, owners often report that a longer hold works better. Press and hold the power button and the volume-down button together for roughly 10 to 15 seconds until the status light flashes. Release both buttons and allow the headphones to restart. Check your model’s manual if neither method produces a response, because the button layout differs between Quiet Comfort generations.

Re-Pair Your Headphones After Resetting

A reset erases saved connections, so you need to pair the headphones again. Turn on Bluetooth on your device, put the headphones into pairing mode (usually by holding the Bluetooth button until you hear a prompt), and select the Bose model from the device list. Once connected, play a short audio clip to confirm sound is coming through both earcups. If you are working with a specific phone, these walkthroughs can help: How to Pair Bose Headphones with iPhone and How to Connect Bose Headphones to MacBook.

Common Mistakes to Avoid

  • Holding the button for too short a time. A quick press usually just powers the unit on or off.
  • Skipping the pairing step on the phone, then assuming the headphones are broken.
  • Forgetting to remove the headphones from old devices, which can cause them to reconnect unexpectedly.
  • Resetting while the battery is nearly empty, which can interrupt the process.
  • Assuming all Quiet Comfort models share the same button sequence. Check your specific generation first.

A USB-C charging cable that came with your headphones, or a replacement from a reputable brand, keeps the battery topped up during troubleshooting. View on Amazon

A soft carrying case protects the earcups and cable while you test different connection methods on the go. View on Amazon

FAQ

Will resetting my Bose headphones delete my settings?

Yes, a full reset clears saved Bluetooth pairings and returns settings to factory defaults. You will need to pair the headphones again with each device you use.

Why won’t my Bose Quiet Comfort headphones enter pairing mode?

The battery may be too low, or the headphones may still be connected to another device. Charge them fully and disconnect them from other devices before trying again.

Is a reset the same as a firmware update?

No. A reset clears connections and settings, while a firmware update changes the software running on the headphones. If problems continue after resetting, check the Bose Music app for available updates.

Conclusion

Resetting Bose Quiet Comfort headphones usually takes less than a minute once you know the right button hold for your model. After the reset, re-pair the headphones with each device and test the audio. If the problem persists, the warranty or Bose support team can help you decide on next steps.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.