Updated November 2026

Razer headphones noise cancelling is a question many gamers and commuters ask before buying. Not every Razer headset includes active noise cancelling, so the answer depends on the specific model. This guide shows you how to confirm whether a Razer pair has ANC, how to use it, and what to check before you buy.

Check Whether a Razer Model Has Active Noise Cancelling

Razer sells gaming headsets, wireless earbuds and a few over-ear designs, and the feature set varies a lot across that lineup. Start by looking at the product page for the words “active noise cancelling” or “ANC.” If the spec sheet only mentions passive isolation, cushioned earcups or a closed-back design, the headset blocks some sound through its physical build but does not run electronic cancellation.

Shopping for one? See our guide: Better Noise Cancelling Headphones: 6 Best Picks Compared (2026).

Passive isolation and active cancellation are different things. Passive designs rely on the ear cup seal and padding to reduce high-frequency noise. Active systems use microphones and a processor to generate an opposing sound wave, which works best on steady, low-frequency sounds like engine hum, fans and air conditioning. For a plain explanation of the two approaches, read How Do Noise Cancelling Headphone Work: Passive and Active Methods Explained.

Set Up and Test ANC on a Razer Headset

Once you own a model with ANC, the setup is usually simple. Follow these steps:

  1. Charge the headset fully before the first use, since ANC drains the battery faster than normal playback.
  2. Pair the headset with your device over Bluetooth, or connect the USB dongle if the model uses one.
  3. Install Razer Synapse or the companion app, if the model supports it, and update the firmware.
  4. Find the ANC control, which may be a button on the ear cup or a setting in the app, and switch it on.
  5. Test in a quiet room with a steady background noise, such as a fan, to hear the difference.

If the change is small, check the seal. Cancellation depends on a tight fit, so adjust the headband and make sure the ear cups sit flat around your ears.

Factors That Affect Noise Cancelling Performance

Even a model with ANC will perform differently depending on how you use it. Three factors matter most:

  • Fit: A loose seal lets sound leak in, and glasses with thick arms can break the seal.
  • Noise type: ANC handles steady rumble well and struggles with sudden sounds like voices or keyboard clicks.
  • Connection: Wired use may bypass battery-powered ANC on some models, so check whether the feature works in each mode.

If you plan to use the headset for long sessions, the way it feels on your head matters as much as the cancellation itself. For a comparison of how different brands approach ANC, see Sony Versus Bose Noise Cancelling Headphones: Which Fits You Best (2026).

Common Mistakes to Avoid

  • Assuming every Razer headset has ANC. Confirm it on the spec page first.
  • Expecting full silence. ANC reduces steady noise but does not remove speech or sudden sounds.
  • Leaving ANC on with a low battery. Performance can drop as the charge runs down.
  • Ignoring firmware updates. Some ANC and audio improvements arrive through updates.
  • Skipping the fit test. A poor seal undermines even good hardware.

FAQ

Do all Razer headphones have noise cancelling?

No. Some Razer models use passive isolation only, while others include active noise cancelling. Check the product specifications for the ANC feature before buying.

Is Razer noise cancelling as strong as Bose or Sony?

Performance varies by model and by the type of noise. Comparisons are easier to judge with a reviewer’s measurements or a try-on at a store, so check the official site for current specs.

Can I use Razer ANC headphones for sleep?

Some people use ANC to block steady background noise at night, but comfort and fit matter more for sleep. If you have trouble sleeping, consult a healthcare professional.

Conclusion

Razer headphones noise cancelling depends on the specific model, so confirm ANC on the product page before you buy. Once you have a model with the feature, set it up properly, check the fit, and test it against the kind of noise you actually face. Set your expectations around steady sounds and you will get the most from it.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.