Updated November 2026
If your Bose headphones won’t connect, the problem is usually one of three things: the headphones aren’t in pairing mode, an old pairing is blocking a new one, or the source device has Bluetooth turned off or is tied to another connection. This guide walks you through checking each of those, then resetting the headphones if nothing else works. Most people get a connection back in under ten minutes.
Start With the Basics on Both Devices
Before you change any settings, confirm the simple things. Bose headphones have a small Bluetooth button, and the battery needs enough charge to power the Bluetooth radio. Owners often report that headphones with a low battery will power on but refuse to pair or drop out after a few seconds.
Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).
- Charge the headphones for at least 15 minutes, then try again.
- Confirm Bluetooth is on for your phone, tablet or laptop.
- Keep the headphones within about 3 feet of the device during pairing.
- Make sure no other device, such as a TV or a second phone, is currently connected to the headphones.
Put the Headphones Into Pairing Mode
A Bose headset only accepts new connections when it is in pairing mode. If you press the power button and hear a voice prompt, you are in the wrong mode. Press and hold the Bluetooth button until you hear the prompt indicating pairing mode, then look for the headphones in your device’s Bluetooth list. The exact button and sound vary by model, so check your model’s manual if the prompt is unclear.
Clear Old Pairings That Block New Connections
Headphones remember previous devices. When the old phone is still in range, it can grab the connection before your new device gets a chance. Forget the Bose headphones on every device you no longer use, then reset the pairing list on the headphones themselves.
Remove the headphones from your device
On an iPhone, open Settings, go to Bluetooth, tap the info icon next to the headphones and choose Forget This Device. On Android, open Bluetooth settings, tap the gear icon beside the device and choose Unpair or Forget. On a Mac, use the Bluetooth menu bar icon or System Settings, then remove the device.
Reset the Headphones
If the headphones still won’t appear, a reset clears their stored connections and returns them to factory pairing behavior. The reset method depends on the model. For many Bose headphones, you press and hold the power button and the Bluetooth button together for about 10 seconds, until you hear a confirmation. Check your model’s user guide for the exact combination, since some older models use different button sequences.
After resetting, put the headphones back into pairing mode and connect them fresh, as described above.
Update Firmware and Software
Outdated firmware can cause pairing failures, especially after a phone or operating system update. Bose publishes firmware updates through its companion app, and the update process usually takes a few minutes with the headphones charged. Keep your phone’s operating system current too. A mismatch between a new OS and older headphone firmware is a common cause of connection problems that appear suddenly.
Common Mistakes
- Pressing the power button instead of the Bluetooth button when trying to pair.
- Leaving the headphones connected to a laptop or TV in another room, which blocks the phone.
- Forgetting the device on one platform but not on another, such as an iPhone and a MacBook sharing the same Apple ID.
- Skipping the charge. A low battery is a frequent and easy-to-miss cause.
- Repeating the same steps without a full reset, which often leaves the stale pairing in place.
Recommended Gear
A basic USB-C or USB-A charging cable helps rule out battery issues quickly, and a spare cable is worth keeping in a bag. View on Amazon
A small pouch or case protects the headphones from accidental button presses in a bag, which can leave them stuck in a mode that interferes with pairing. View on Amazon
Related Guides
If you connect to a specific device, the steps differ slightly. See How to Connect Bose Headphones to iPhone: A Step-by-Step Guide (2026) or How to Connect Bose Headphones to MacBook: A Step-by-Step Guide (2026). If the connection drops after it works, Bose QC 45 Headphones: Why They Disconnect and How to Fix It covers that problem. For a general pairing failure on any brand, How to Fix Bluetooth Headphones That Won’t Pair offers a wider set of checks.
FAQ
Why do my Bose headphones show up on my phone but won’t connect?
This usually means an old pairing or a stale connection is interfering. Forget the headphones on your phone, reset them, and pair again from scratch.
How do I know my Bose headphones are in pairing mode?
You will hear a voice prompt or a specific tone indicating pairing mode, and the indicator light typically flashes. The sound confirms that the headphones are ready to accept a new connection.
Will resetting my Bose headphones erase their firmware?
No. A reset clears saved device pairings and returns settings to defaults, but it does not remove the firmware. If you suspect firmware trouble, run an update through the Bose app instead.
Conclusion
Most Bose connection problems come down to pairing mode, a stale pairing, or a low battery. Work through the basics first, clear old pairings, then reset the headphones if needed. If the problem continues after a full reset and firmware update, contact Bose support for further help.

