Updated November 2026

Learning how to Bluetooth connect Bose headphones takes only a minute once you know the sequence. You will put your headphones into pairing mode, select them from your phone or computer, and confirm the connection. This guide also covers what to do when the headphones refuse to show up.

Before You Start

Charge your headphones first. Many Bose models will not enter pairing mode reliably with a low battery, and a short charge often clears up odd behavior. Make sure the device you want to connect to has Bluetooth turned on and is close to the headphones, ideally within a few feet.

Shopping for one? See our guide: Bose SoundLink On-Ear Bluetooth Wireless Headphones Review (2026).

How to Connect Bose Bluetooth Headphones to Your Device

  1. Turn the headphones off, then press and hold the Bluetooth button (or the power button, depending on the model) until you hear a voice prompt or see a light flash. This signals pairing mode.
  2. On your phone, tablet or computer, open the Bluetooth settings and make sure Bluetooth is switched on.
  3. Select your Bose headphones from the list of available devices. The name usually matches the model, such as “Bose QuietComfort Headphones.”
  4. Wait for the confirmation sound or on-screen message that says the headphones are connected.

If you have used the headphones with another device before, they may try to reconnect automatically to that device. Turn off Bluetooth on the old device or unpair it first. For more detail on specific phones, see How to Connect Bose Headphones to iPhone: A Step-by-Step Guide (2026) and How to Connect Bose Headphones to MacBook: A Step-by-Step Guide (2026).

How to Connect Bose Headphones to Bluetooth on Different Devices

The steps above work across most platforms, but the menu names differ slightly. On Android, look under “Connected devices” or “Bluetooth” in Settings. On Windows, open Settings, go to Bluetooth and devices, and choose “Add device.” On a Mac, use the Bluetooth section of System Settings.

Device Where to Find Bluetooth
iPhone or iPad Settings, then Bluetooth
Android phone Settings, then Connected devices or Bluetooth
Windows PC Settings, then Bluetooth and devices
Mac System Settings, then Bluetooth

What to Do When Bose Headphones Won’t Connect

If your headphones do not appear in the list, reset them and try again. Owners often report that a reset clears stale pairing data and fixes the problem. Keep the headphones close to the device and avoid other Bluetooth gadgets competing nearby. For more troubleshooting, read How to Fix Bluetooth Headphones That Won’t Pair and How to Reset Bose Headphones: A Step-by-Step Guide (2026).

Common Mistakes

  • Trying to pair while the headphones are still connected to another device.
  • Releasing the Bluetooth button too early, so the headphones never enter pairing mode.
  • Forgetting to turn Bluetooth on at the source device.
  • Leaving an old pairing on the phone, which blocks a fresh connection.
  • Pairing with a low battery, which can cause intermittent drops.

A USB-C charging cable helps keep the battery topped up so pairing mode works reliably. A hard carrying case protects the headphones when you move them between devices.

  • Bose QuietComfort Headphones USB-C charging cable: keeps the battery ready for pairing. View on Amazon
  • Bose headphones hard carrying case: protects the headphones during travel. View on Amazon

FAQ

Why won’t my Bose headphones show up in Bluetooth settings?

The headphones are usually not in pairing mode, or they are still linked to another device. Reset them and press the Bluetooth button until the pairing prompt sounds.

Can I connect Bose headphones to two devices at once?

Many Bose models support multipoint connection, which lets them link to two devices at the same time. Check your model’s manual to confirm this feature is supported.

Do I need to pair Bose headphones again after they turn off?

No. Once paired, they usually reconnect automatically when you turn them on near the same device.

Conclusion

To Bluetooth connect Bose headphones, put them in pairing mode, select them from your device’s Bluetooth list, and wait for the confirmation. Clear old pairings and keep the battery charged to avoid most problems. If issues persist, a reset usually sorts them out.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.