Updated November 2026

To turn on most Bose Quiet Comfort headphones, press and hold the power button until you hear a voice prompt or a rising tone, then release it. The exact button location and hold time depend on your model, so this guide covers the common layouts and what to do if nothing happens. Once the headphones are on, you can confirm the battery level and connection status in just a few seconds.

Find the Power Button on Your Model

On most over-ear Quiet Comfort models, the power button sits on the outside of the right earcup, usually near the Bluetooth or pairing button. On the Quiet Comfort Ultra and some newer designs, the controls are on the right earcup as a touch surface plus a dedicated switch, so check the side labeled with the power icon. Earbud-style Quiet Comfort models use a different approach: you open the case, and the earbuds power on when removed or when you press the button on the case.

Shopping for one? See our guide: Bose Quiet Comfort Headphones Buttons: 3 Best Replacement Parts for Repair.

Power On the Headphones

  1. Make sure the headphones are charged or connected to a power source.
  2. Press and hold the power button for about one to two seconds, until the status light appears or you hear a tone.
  3. Listen for the startup sound. A rising tone or a spoken message such as “Power on” confirms the headphones are running.
  4. If the headphones were in a case or folded, unfold the earcups first, since some models only wake fully when the arms are extended.

Confirm They Are On and Ready

A solid or blinking light near the power button, along with the startup tone, tells you the headphones are active. Bose manufacturers specify that the status indicator changes color or pattern to show battery level and Bluetooth state. If you hear a voice prompt, it usually announces the battery level or the connected device name.

What you see or hear What it usually means
Rising tone or “Power on” Headphones are running and ready to pair
Steady light after power-on Connected to a previously paired device
Blinking light Searching for a device or in pairing mode
No light, no sound Battery is empty or the power press didn’t register

Troubleshoot When They Won’t Turn On

If the headphones stay silent, charge them for at least 15 minutes, then try the power button again. Owners often report that a fully drained battery needs longer on the charger before any light appears. Use the original USB cable and a known power source, since a weak adapter or damaged cable can keep the battery from registering. If the headphones still don’t respond after a full charge, a hard reset may help; see the guide on How to Reset Bose Headphones: A Step-by-Step Guide (2026) for the steps.

Common Mistakes

  • Tapping the power button briefly instead of holding it. Most models need a press of one to two seconds.
  • Confusing the Bluetooth pairing button with the power button. Pairing mode usually causes a blinking light, not a startup tone.
  • Assuming the headphones are off because there’s no sound. Check the status light before troubleshooting.
  • Charging with a low-output adapter, which can make the battery appear dead for longer than necessary.
  • Leaving the headphones on in a bag. Turn them off when not in use to preserve battery life.
  • Bose USB-C charging cable: a replacement cable keeps charging reliable if the original is lost or frayed. View on Amazon
  • Bose Quiet Comfort carrying case: a hard case protects the earcups and controls from pressing against other items in a bag. View on Amazon

FAQ

Why won’t my Bose Quiet Comfort headphones turn on?

The most common cause is a drained battery. Charge them for at least 15 minutes with a working cable and adapter, then try the power button again.

How do I know if my Bose headphones are on?

You will hear a startup tone or voice prompt and see a light near the power button. A steady light usually means they are connected to a device.

Do Bose Quiet Comfort headphones turn on automatically when I put them on?

Some models power on when you unfold or remove them from a case, but many still need a button press. Check your model’s manual to confirm the behavior.

Conclusion

Turning on Bose Quiet Comfort headphones usually takes a single press and hold of the power button. If they stay off, charge them fully and check the status light before trying other fixes. Once they’re running, pairing with your phone or laptop is the next step.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.