Updated November 2026
Pairing Sony wireless headphones takes about a minute once you know the right button to press. You will put the headphones into pairing mode, select them from your device’s Bluetooth list, and confirm the connection. If the headphones refuse to show up, the fix is usually one of a few simple checks covered below.
Before You Start: Charge and Reset
Most pairing failures come down to a low battery or an old connection still stored on the device. Charge the headphones to at least 30 percent, since a weak battery can drop out during setup. Then turn off Bluetooth on your phone or laptop for a few seconds and turn it back on, which clears stale device lists.
Shopping for one? See our guide: Bose Headphones vs Sony: Which Should You Choose? (2026).
How to Put Sony Headphones Into Pairing Mode
Sony models use slightly different controls, but the general method is the same. Turn the headphones off first. Then press and hold the power button, or the dedicated Bluetooth button on models that have one, until you hear a voice prompt or see an indicator light flash blue or red. Check your model’s manual for the exact hold time, since it varies between generations.
Pairing Sony Headphones to Your Device
- Open Bluetooth settings on your phone, tablet, or computer.
- Make sure Bluetooth is on and the device is set to scan for new devices.
- Select your Sony model name from the list of available devices.
- Wait for the confirmation tone or the indicator light to turn solid.
- Play a short audio clip to confirm sound is coming through the headphones.
Pairing With Multiple Devices
Many Sony models can store several paired devices and switch between them. Pair the first device as described above, then repeat the pairing mode steps for the second device. Once both are stored, the headphones generally reconnect to whichever device you start playing audio on.
Common Problems and Quick Fixes
| Problem | Likely cause | What to try |
|---|---|---|
| Headphones don’t appear in the list | Not in pairing mode | Hold the power or Bluetooth button until the indicator flashes |
| Connection drops often | Too much distance or interference | Stay within about 10 meters and move away from Wi-Fi routers |
| Paired but no sound | Audio output set to another device | Choose the Sony headphones in your sound output settings |
| Won’t reconnect after a reset | Old pairing stored on the device | Forget the headphones on the device, then pair again |
Common Mistakes and Tips
- Pairing while the headphones are already connected to another device, which blocks the new connection.
- Holding the button too briefly, so the headphones power on instead of entering pairing mode.
- Forgetting to remove the old pairing before trying again after a reset.
- Expecting multipoint behavior on every model. Check the specifications for your exact generation.
- Skipping a firmware update. Sony’s companion app can check for updates that improve connectivity.
Recommended Gear
- Sony WH-1000XM5 carrying case: A hard case protects the headphones and keeps the cable and charging cable together when you travel. View on Amazon
- USB-C charging cable: A spare cable makes it easy to top up the battery before pairing. View on Amazon
If you are comparing models or troubleshooting a different brand, see Sony Headphones Bluetooth Pairing: A Step-by-Step Guide for Beginners and Wired vs Wireless Headphones for background on how Bluetooth connections differ.
FAQ
Why won’t my Sony headphones show up on my phone?
The headphones are usually not in pairing mode. Turn them off, then hold the power or Bluetooth button until the indicator flashes or a voice prompt plays.
Can I pair Sony headphones with two devices at once?
Some models support multipoint connection to two devices, but many only store multiple pairings and switch between them. Check your model’s manual to confirm.
How do I unpair Sony headphones?
Open the Bluetooth settings on the device, select the headphones, and choose “Forget” or “Unpair.” Then put the headphones back into pairing mode to connect again.
Conclusion
Once you know how to enter pairing mode, connecting Sony wireless headphones becomes a quick process. Keep the battery charged, clear old pairings when something goes wrong, and check your model’s manual for button details. If problems persist, contact Sony support for help with your specific model.

