Updated November 2026
To pair Bose Quiet Comfort headphones, put them into pairing mode, turn on Bluetooth on your device, and select the headphones from the list of available devices. Most models take under a minute once you know which button to hold. This guide covers the general process, the differences between models, and what to do when the connection won’t stick.
Before You Start
Charge the headphones first. Low battery can cause the pairing light to behave oddly or the connection to drop right after setup. Also check that the headphones aren’t already connected to another device, since a headset that’s actively linked to a phone may not appear as available to a laptop.
Shopping for one? See our guide: Bose Quiet Comfort Headphones Buttons: 3 Best Replacement Parts for Repair.
- Headphones charged to at least 30 percent or plugged into a USB-C cable
- Bluetooth turned on for the device you want to pair with
- Any previously connected phone or tablet nearby but switched off Bluetooth temporarily
- The Bose Music app installed, if you want firmware updates and custom settings
How to Put Bose Quiet Comfort Headphones in Pairing Mode
The button combination depends on the model, but the pattern is similar. Power the headphones off first. Then press and hold the Bluetooth button, or the power button on models without a dedicated Bluetooth key, until you hear a voice prompt or see the LED flash blue and white.
- Make sure the headphones are off.
- Press and hold the Bluetooth or power button for about three to five seconds.
- Wait for the voice prompt that says the headphones are ready to pair, or for the light to start flashing.
If the headphones power on instead of entering pairing mode, hold the button a bit longer next time. The exact timing varies slightly between generations.
Connect Your Phone, Tablet or Laptop
Once the headphones are flashing, open the Bluetooth settings on your device. The headphones will appear under a name that includes “Bose” and the model, such as “Bose QC45” or “Bose QuietComfort Ultra.” Select them, and wait for the device to confirm the connection.
On iPhone and iPad
Go to Settings, then Bluetooth, and tap the headphones under Other Devices. Once paired, iOS will reconnect automatically whenever the headphones are on and nearby.
On Android and Windows
Open Bluetooth settings, choose Pair new device, and select the headphones. On Windows, the pairing sometimes shows up under Add Device as a generic audio device; choose it and confirm.
Fixing Common Pairing Problems
Owners often report that the headphones appear on one device but refuse to connect. In most cases, the cause is an old pairing record or a device still linked to the headphones. Forgetting the headphones on both sides and starting over usually solves it. If that doesn’t work, a full reset is the next step, and the reset process is covered in a separate guide.
Common Mistakes
- Holding the button too briefly, which turns the headphones on instead of entering pairing mode.
- Leaving the headphones connected to a previous phone, so the new device can’t see them.
- Pairing while the headphones are still in a case or near a laptop that’s already streaming to them.
- Forgetting to update firmware through the Bose app, which can cause dropped connections.
- Assuming all Quiet Comfort models share the same button layout. Check your specific model first.
Recommended Gear
- A USB-C cable keeps the headphones charged during setup and avoids battery-related pairing failures. View on Amazon
- A soft carrying case protects the headphones from scratches and pressure that can affect the buttons. View on Amazon
FAQ
Why won’t my Bose Quiet Comfort headphones show up in Bluetooth settings?
They are probably not in pairing mode. Turn them off, then hold the Bluetooth or power button until you hear the pairing prompt or see the light flash.
Can I pair Bose Quiet Comfort headphones with two devices at once?
Many Quiet Comfort models support multipoint, which lets them stay linked to two devices. Check your model’s manual or the Bose app to confirm support and turn it on.
Do I need the Bose app to pair the headphones?
No. Standard Bluetooth pairing works without the app. The app is useful for firmware updates, custom controls and noise cancelling adjustments.
Conclusion
Pairing Bose Quiet Comfort headphones comes down to entering pairing mode and selecting the headphones from your device’s Bluetooth list. If something goes wrong, forget the pairing on both sides and try again with a full charge. For model-specific steps, check the guides linked from our brand tracker.

