Updated November 2026

To put Bose QuietComfort headphones in pairing mode, power them off, then press and hold the Bluetooth button until you hear a voice prompt saying “Ready to connect” or see the light flash. Once they are in pairing mode, they will show up in your phone’s or computer’s Bluetooth list under their model name. The steps below cover the common QuietComfort models and what to check if they don’t appear.

Before You Start

Pairing mode only works when the headphones are charged enough to run and are not already connected to another device. Bose QuietComfort headphones also remember up to eight paired devices, so an old connection can sometimes get in the way of a new one.

Shopping for one? See our guide: 7 Best Pairing Bose QuietComfort Headphones Options for Daily Use (2026).

  • Charge the headphones for at least 15 minutes, or until the battery indicator shows enough power.
  • Turn off Bluetooth on any phone or laptop that is currently connected to the headphones.
  • Keep the headphones within about three feet of the device you want to pair.

How to Enter Pairing Mode on Bose QuietComfort Headphones

  1. Turn the headphones off. Slide the power switch to off, or press and hold the power button until the voice prompt says “Power off.”
  2. Press and hold the Bluetooth button. This is the button marked with the Bluetooth symbol, usually on the right ear cup. Keep holding it while you turn the headphones on.
  3. Wait for the pairing prompt. When you hear “Ready to connect” or the status light starts flashing, release the button. The headphones are now discoverable.

Button Layout Varies by Model

On some QuietComfort models, the Bluetooth button shares space with the power button or sits on the left cup. Check your model’s manual if you can’t find it. Some newer QuietComfort Ultra models use the same press-and-hold approach, but the button position may differ.

Connect Your Device to the Headphones

After the headphones enter pairing mode, open the Bluetooth menu on your device and wait for the name to appear. Select your headphones to complete the connection.

  • iPhone or iPad: Settings, then Bluetooth, then tap your Bose model name.
  • Android: Settings, then Connected devices or Bluetooth, then tap the headphones under available devices.
  • Windows or Mac: Open Bluetooth settings and choose the headphones from the list of nearby devices.

If the device asks for a passcode, enter 0000 or leave it blank, since most Bose QuietComfort models don’t require one.

What to Do If the Headphones Don’t Appear

If your device doesn’t see the headphones, the most common cause is that they never actually entered pairing mode, or they still have an active link to another device. Owners often report that a full power cycle clears the problem: turn the headphones off, wait about 10 seconds, and try the steps again. If the headphones still won’t pair, a reset may be needed. Our guide to resetting Bose QuietComfort headphones walks through that process.

Common Mistakes

  • Pressing the Bluetooth button without holding it long enough. Hold it while powering on, not just tapping it.
  • Leaving the headphones connected to a previous phone, which blocks new pairing requests.
  • Pairing from too far away. Stay close, especially near Wi-Fi routers or metal objects that can interfere.
  • Skipping the wait for the voice prompt. Releasing the button too early can cancel pairing mode.
  • A USB-C charging cable: A reliable cable makes sure the headphones have enough charge to enter pairing mode. View on Amazon
  • A protective carrying case: A hard case keeps the ear cups and controls from getting pressed accidentally in a bag. View on Amazon

FAQ

Why won’t my Bose headphones show up on my phone?

The headphones may not be in pairing mode, or they may still be connected to another device. Turn them off, clear the other connection, and try again while holding the Bluetooth button.

How long do Bose headphones stay in pairing mode?

Pairing mode typically stays active for a few minutes before the headphones time out. If that happens, power them off and repeat the steps.

Do I need a passcode to pair Bose QuietComfort headphones?

Most QuietComfort models don’t require a passcode. If your device asks for one, try 0000 first.

Conclusion

To put Bose QuietComfort headphones in pairing mode, hold the Bluetooth button while powering them on, then wait for the voice prompt or flashing light. From there, select the headphones in your device’s Bluetooth menu. If that doesn’t work, clear old connections or perform a reset before trying again.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.