Updated November 2026
Learning how to turn off noise cancelling on AirPods takes less than a minute once you know where the control lives. You can switch between Noise Cancellation, Transparency and Off from your iPhone, iPad or Mac, and the change takes effect right away in both earbuds. This guide covers the fastest method on each platform and what to do when the setting seems stuck.
Turn Off Noise Cancelling from an iPhone or iPad
The quickest route is the Control Center. With AirPods connected, open Control Center, then press and hold the volume slider (or the sound card) until the listening mode options appear. Tap Off to disable noise cancelling completely, or tap Transparency if you still want to hear your surroundings.
Shopping for one? See our guide: 8 Best Airpods 4 Noise Cancelling Options for Commuters in 2026.
If you prefer the Settings app, go to Settings > Bluetooth, tap the small (i) icon next to your AirPods, and choose Off under Noise Control. For more background on the feature itself, see Apple AirPods 4 Active Noise Cancelling: How It Works and How to Use It.
Change the Mode from a Mac or Other Bluetooth Device
On a Mac, click the Control Center icon in the menu bar, then the sound control, and select your AirPods under the output options. Pick Off from the listening mode menu. Some Mac versions place this under the Bluetooth menu bar icon instead, so look there if you don’t see it in the first spot.
If you use AirPods with an Android phone, Apple’s noise control options aren’t available in the phone’s settings. You can still disable the feature by long-pressing the stem or using the Noise Control options through a paired Apple device. Android users who want to fine-tune output may also find How to Turn Up Volume on AirPods on Android: 5 Fixes That Work useful.
Use the Stem Press Gesture
You can also cycle through modes without opening any menu. On most AirPods models that support noise control, press and hold the stem of either earbud until you hear a tone. Each press-and-hold moves to the next mode in the cycle you’ve set up. Check your current setting in the Bluetooth menu first, because the gesture only cycles through the modes you have enabled.
The exact cycle depends on your model and your Settings. Some people find the gesture triggers other actions, such as Siri, so if you keep getting an unexpected response, reassign the press-and-hold action under Settings > Bluetooth > AirPods > Press and Hold AirPods.
Troubleshoot When the Setting Won’t Stay Off
If noise cancelling keeps switching back on, the usual cause is that the setting is linked to a different device or that Adaptive mode is active. Adaptive Audio adjusts noise control automatically based on your surroundings, so turning it off may give you more consistent results. Check the same Noise Control menu for an Adaptive option.
- Make sure both earbuds are seated correctly and the charging case lid is open while you test.
- Disconnect the AirPods from other nearby Apple devices, then reconnect to the one you’re using.
- Restart the device you’re controlling from.
- If the setting still won’t change, reset the AirPods by holding the setup button on the case until the light flashes amber then white, and pair again.
Common Mistakes
- Confusing Transparency with Off. Transparency lets outside sound through, while Off applies no processing at all.
- Expecting the stem gesture to change a mode you haven’t enabled in Settings.
- Changing the setting on one device while AirPods are still connected to another.
- Forgetting that Adaptive mode can re-enable noise control on its own.
Recommended Gear
- A soft silicone ear tip set for AirPods Pro models: a better seal changes how much outside sound you hear, so test with and without noise control. View on Amazon
- A protective case for the charging case: useful if you keep the case in a bag where the setup button may get pressed accidentally. View on Amazon
FAQ
Can I turn off noise cancelling on AirPods without an iPhone?
Yes, but the options are limited. Apple’s mode controls are built into iOS, iPadOS and macOS, so a Mac or iPad is the most practical substitute. Android users generally cannot change the mode directly from the phone.
Does turning off noise cancelling improve battery life?
Noise cancelling uses extra processing, so manufacturers generally note that turning it off can help battery life. The gain varies with usage and model, so treat it as a modest benefit rather than a large one.
Why did my AirPods switch back to noise cancelling by themselves?
Adaptive Audio or a linked device is the most common reason. Disable Adaptive in the Noise Control menu and make sure the AirPods aren’t still connected to another Apple device.
Conclusion
To turn off noise cancelling on AirPods, use the Control Center or the Bluetooth settings on your Apple device and choose Off. If the mode keeps changing, check Adaptive Audio and disconnect from other devices. A quick reset will fix most stubborn cases.

