Updated November 2026
Pairing Bose headphones with a Mac takes about two minutes once the headphones are in pairing mode. You will connect through macOS Bluetooth settings, confirm the connection, and set the headphones as your default audio output. If the connection drops or never appears, the fixes are usually simple, and they are covered below.
Before You Start
Bose headphones can remember several devices, but they only pair with one at a time in pairing mode. Before you begin, check the following:
Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).
- The headphones are charged. Bose manufacturers recommend charging for at least 15 minutes if the battery is very low.
- Bluetooth is enabled on your Mac. macOS ships with Bluetooth turned on by default.
- Any other device that is currently connected to the headphones has been disconnected or turned off.
Step-by-Step: Connecting Bose Headphones to a Mac
Step 1: Put the Headphones in Pairing Mode
Power off the headphones, then press and hold the Bluetooth button until you hear a voice prompt or see the status light flash. On many models, the light alternates between blue and white. Check your model’s manual, because the exact button and light pattern vary by product line.
Step 2: Open Bluetooth Settings on Your Mac
Click the Apple menu, choose System Settings, then select Bluetooth in the sidebar. On older macOS versions, you will find Bluetooth under System Preferences. Leave this window open while the headphones search.
Step 3: Select Your Headphones
Your Bose headphones should appear under Other Devices within about 10 seconds. Click Connect next to the model name. When the status changes to Connected, the pairing is complete.
Set Bose as Your Mac’s Audio Output
Pairing alone does not always switch your audio. macOS may keep sending sound to the built-in speakers. To change this, open System Settings, select Sound, and choose your Bose headphones under Output. You can also hold the Option key and click the volume icon in the menu bar to switch outputs quickly.
Once selected, play a short video or music track to confirm audio is coming through the headphones.
Managing Multiple Devices and Reconnection
Many Bose models can connect to two devices at once, so your Mac and phone may both stay linked. When you play audio on one device, the headphones usually switch to it automatically. If that behavior causes trouble, disconnect the other device in its Bluetooth settings.
If your Mac does not reconnect after a restart, turn the headphones off and on again, then select them from the Bluetooth menu. Removing an old pairing and starting fresh is also effective. In Bluetooth settings, click the information icon next to the headphones and choose Forget This Device, then repeat the pairing steps above.
Common Mistakes
- Pairing with the headphones not in pairing mode. The device will not appear in the list.
- Forgetting to change the sound output, so audio still plays through the Mac speakers.
- Leaving the headphones connected to a phone, which blocks the Mac from connecting.
- Skipping a full charge when the battery is very low, which can cause disconnects.
- Keeping outdated macOS versions, which sometimes causes Bluetooth pairing failures.
Recommended Gear
- A short USB-C charging cable helps keep the headphones topped up before a work session. View on Amazon
- A hard carrying case protects the headphones and keeps the cable tidy in a bag. View on Amazon
FAQ
Why won’t my Bose headphones show up on my Mac?
The most common reason is that the headphones are not in pairing mode. Power them off, then hold the Bluetooth button until the status light flashes before searching again.
Can I use Bose headphones with my Mac and iPhone at the same time?
Many multipoint-capable Bose models can stay linked to two devices. Audio switches to whichever device starts playing, though you may need to disconnect one device if switching is inconsistent.
Do I need to install a driver to use Bose headphones on a Mac?
No. macOS supports Bluetooth audio natively, so no driver is needed. The Bose Music app is optional and only adds features like firmware updates and sound settings.
Conclusion
To pair Bose headphones with a Mac, enable pairing mode, select the headphones in Bluetooth settings, then choose them as the sound output. Most connection problems come from the headphones being in the wrong mode or still linked to another device. For related setup help, see How to Pair Bose Headphones to iPhone: A Step-by-Step Guide (2026) and How to Fix Bluetooth Headphones That Won’t Pair.

