Updated November 2026

Learning how to unpair Bose headphones takes only a minute or two, and it solves a common problem: the headphones keep connecting to an old phone or laptop instead of the device you want. You can remove the pairing from your device’s Bluetooth settings, and in many cases reset the headphones themselves so they forget every saved connection. This guide covers both steps and what to do when the headphones refuse to let go.

Remove the Pairing From Your Device First

The simplest fix is to tell the device to forget the headphones. The exact menu depends on your operating system, but the steps are similar almost everywhere.

Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).

  1. Turn on the headphones and make sure they are connected to the device.
  2. Open Bluetooth settings. On an iPhone, go to Settings, then Bluetooth. On Android, go to Settings, then Connected devices or Bluetooth. On Windows, go to Settings, then Bluetooth & devices. On a Mac, go to System Settings, then Bluetooth.
  3. Find your Bose model in the list of paired devices.
  4. Tap the information icon (iPhone or Mac), the gear icon (Android), or the three-dot menu (Windows), then choose Forget This Device, Unpair or Remove.
  5. Confirm the action. The headphones should disappear from the list.

Repeat this on every device that still lists the headphones. If you use a Bose headset with a laptop and a phone, both need to forget it.

Reset the Headphones to Clear Saved Pairings

Removing the pairing on your phone does not always clear the headphones’ own memory. Many Bose models store several paired devices at once, so a reset is the reliable way to start fresh. The reset method varies by model, so check the manual for your exact headphones. For most current Bose over-ear models, the general approach is:

  1. Turn the headphones off completely.
  2. Press and hold the Bluetooth button (or the power button on some models) until you hear a voice prompt or see the light change. Owners often report that this takes around 5 to 10 seconds.
  3. Release the button and wait for the headphones to announce that they are ready to pair.
  4. Open the Bluetooth menu on your device and confirm that the headphones now appear as a new device.

Unpair Bose Earbuds and Wireless Models Differently

Bose earbuds usually store pairing information in the case or on each earbud, so you may need to reset both parts. For earbud models, open the case, press and hold the button on the back of the case until the status light flashes, then remove the earbuds and repeat on the device. Consult the official Bose support page for your specific model if the light sequence does not match what you see.

Troubleshooting When the Headphones Reconnect Automatically

If the headphones keep reconnecting to a device you already removed, the most likely cause is that the device still has an active link. Turn Bluetooth off on that device, then forget the headphones again. Check whether a phone app, a laptop app or a streaming service is set to auto-connect to the headphones. Finally, make sure no other device nearby is powered on and within Bluetooth range, since it may be grabbing the connection first.

Common Mistakes to Avoid

  • Forgetting the headphones on only one device when several have stored the pairing.
  • Holding the Bluetooth button too briefly, which often only starts a new pairing attempt instead of a reset.
  • Forgetting to unpair earbuds from the case, which can leave the old link active.
  • Skipping a full power cycle. Turn the headphones off and on again after resetting.
  • Assuming all Bose models use the same button sequence. Check the manual for your model.

A few items can make the process smoother. A USB-C or USB-A charging cable helps if the headphones need a charge before a reset will register. A protective case keeps the earbuds and charging contacts clean so the buttons and case lid work reliably.

  • Bose-compatible USB-C charging cable: a short, certified cable keeps charging stable during setup. View on Amazon
  • Silicone protective case for Bose earbuds: keeps the charging case and buttons clean and protected. View on Amazon

FAQ

Will unpairing my Bose headphones delete my settings?

Unpairing removes the Bluetooth connection, not the headphones’ firmware or the Bose app installed on your phone. Custom settings tied to your account may still sync when you reconnect.

Can I unpair Bose headphones without a phone?

Yes. A reset using the headphones’ own buttons clears the saved pairings without needing any device, although you will need to pair again afterward.

What if my Bose headphones still won’t pair after a reset?

Charge the headphones fully, restart the device you are pairing to, and try again. If problems continue, contact Bose support or an authorized service center.

Conclusion

To unpair Bose headphones, remove them from every device’s Bluetooth list, then reset the headphones to clear their saved memory. Earbud models need the case reset as well. Once everything is cleared, pair the headphones again with the device you actually want to use.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.