Updated November 2026
To connect Bose QuietComfort headphones, you put them into pairing mode, select them from your device’s Bluetooth menu, and confirm the connection. Most models take under two minutes once you know where the pairing button is. This guide covers the basic steps, what to do when your headphones don’t show up, and a few habits that prevent repeat pairing headaches.
Before You Start: Check Your Headphones and Device
Make sure your headphones have enough charge. A battery under about 20 percent can cause weak or dropped connections. Bluetooth must also be turned on in your phone, tablet or computer, and the device should be close to the headphones, ideally within a few feet.
Shopping for one? See our guide: 5 Best Bose QuietComfort Headphones Case Options for Travel (2026).
If your headphones were previously paired with another device, that pairing can interfere with a new one. Disconnect or forget them on the old device first, or follow a reset process if needed.
How to Pair Bose QuietComfort Headphones Step by Step
- Turn the headphones off. Use the power button, or press and hold the power switch until the status light turns off.
- Enter pairing mode. Press and hold the Bluetooth button until the status light flashes, and you hear a voice prompt saying “Ready to connect.” On some models the power button itself starts pairing when held.
- Open Bluetooth settings on your device. On an iPhone, go to Settings, then Bluetooth. On an Android phone, go to Settings, then Connected devices or Bluetooth. On a Windows PC, go to Settings, then Bluetooth & devices.
- Select your headphones. The name will usually start with “Bose QC” followed by the model. Tap or click it to connect.
- Confirm the connection. You should hear a voice prompt saying “Connected,” and the status light will turn solid or change color depending on the model.
Connecting to a Second Device
Many QuietComfort models can remember more than one device and switch between them. Once your first device is paired, put the headphones back into pairing mode and connect a second device the same way. The headphones will then keep both connections available. Playback usually follows whichever device you started most recently, so you may need to pause audio on one device before playing on another.
Troubleshooting When Your Headphones Won’t Connect
If the headphones don’t appear in the Bluetooth list, check the following:
- Confirm the headphones are in pairing mode. If you don’t hear the “Ready to connect” prompt, hold the Bluetooth button again.
- Remove any old entry for the headphones from your device’s Bluetooth list, then try pairing again.
- Turn Bluetooth off and on again on your phone or computer.
- Restart both the headphones and the device.
- Move away from other Bluetooth devices or Wi-Fi routers that may cause interference.
If the headphones still won’t pair, check the Bose support pages for your exact model, as steps can vary slightly between generations.
Common Mistakes to Avoid
- Holding the wrong button. The power button and the Bluetooth button are separate on many models, so confirm which one starts pairing.
- Pairing while the headphones are still connected to another device, which can block the new connection.
- Waiting too long after entering pairing mode. The headphones may exit pairing mode after a short period, so select them on your device promptly.
- Forgetting to turn Bluetooth on in the device settings before starting.
Recommended Gear
A USB-C charging cable helps keep the battery topped up, since low charge is a frequent cause of weak connections. View on Amazon
A soft carrying case protects the headphones between sessions and keeps the cable and any adapters together. View on Amazon
FAQ
Why won’t my Bose QuietComfort headphones show up on my phone?
The headphones are usually not in pairing mode, or an old pairing is blocking the connection. Hold the Bluetooth button until the light flashes, delete any old entry on your phone, and try again.
Can I connect Bose QuietComfort headphones to two devices at once?
Many models support multipoint connections to two devices, but audio typically plays from one at a time. Check your model’s manual to confirm multipoint support.
Do I need the Bose app to pair my headphones?
No. Pairing happens through your device’s Bluetooth settings. The Bose app is optional and offers extra features such as firmware updates and sound customization.
Conclusion
Connecting Bose QuietComfort headphones comes down to entering pairing mode, selecting the headphones in your Bluetooth menu, and confirming the connection. If something goes wrong, clearing old pairings and restarting both devices solves most problems. Once paired, your headphones should reconnect automatically whenever they’re powered on nearby.
Related reading
- How to Turn Off Bose QuietComfort Headphones: 4 Quick Methods That Work (2026)
- Bose Quietcomfort Ultra Headphones Deals: How to Spot Real Savings (2026)
- Bose QuietComfort Ultra Headphones Sale: How to Spot Real Deals (2026)
- Bose QuietComfort Headphones Sale: How to Find Real Deals on Bose QC Models
- Bose QuietComfort Headphones Deals: How to Spot Real Savings (2026)

