Updated November 2026
To reset Bose QuietComfort headphones, you clear their saved Bluetooth connections and restore them to factory settings. The process takes about 30 seconds and fixes most cases of stuck pairing, dropped audio and unresponsive controls. This guide covers the reset steps, the checks to run first, and what to try if a reset doesn’t help.
Before You Reset Bose QuietComfort Headphones
A full reset erases your paired device list, so you will need to pair again afterward. Before you start, charge the headphones to at least 50 percent, since a reset can interrupt power if the battery is low. If you only want to remove one phone or laptop, you can unpair just that device instead.
Shopping for one? See our guide: 5 Best Bose QuietComfort Headphones Case Options for Travel (2026).
Steps to Reset Bose QuietComfort Headphones
- Turn the headphones off. Slide the power switch to off, or hold the power button until the light goes out.
- Press and hold the power button and the Bluetooth button at the same time for about 10 seconds, until the status light flashes or you hear a voice prompt.
- Release both buttons. The headphones will power down and then restart on their own.
- Turn them on again and check that the light shows the normal pairing or power-on pattern.
Bose models differ slightly in button layout and indicator behavior, so check your product’s manual if the buttons don’t respond as described. Some QuietComfort models use a dedicated reset combination that differs from the one above.
Re-Pair Your Device After the Reset
Once the reset finishes, your headphones will no longer remember any phone, tablet or laptop. Put them in pairing mode, then select them in your device’s Bluetooth menu. If your phone still shows the old pairing, delete that entry first. Platform-specific walkthroughs are available for pairing with an iPhone and for connecting to a Mac.
What to Try If a Reset Doesn’t Fix the Problem
A reset clears software and pairing data, but it won’t repair hardware faults or problems caused by your source device. If the headphones still won’t connect or the sound stays faulty, work through these checks:
| Symptom | Likely cause | Action |
|---|---|---|
| Won’t appear in Bluetooth list | Still paired to another device | Turn off Bluetooth on other devices and retry pairing |
| Connects but no sound | Wrong audio output selected | Choose the headphones as the output in your device settings |
| Drops out repeatedly | Distance or interference | Stay closer to the source and remove nearby obstacles |
| Power won’t come on | Battery fully drained | Charge for at least 30 minutes, then try again |
If none of these resolve the issue, check whether your headphones are still covered by a manufacturer warranty before attempting repairs. Our guide to Bose warranty coverage explains how to check and claim it.
Tips for a Smooth Reset
- Keep the headphones within a few feet of the device you want to pair during setup.
- Update the Bose Music app, since firmware updates sometimes fix connection bugs.
- Forget the headphones on every device before resetting, so old pairings don’t reconnect automatically.
- Don’t hold the buttons longer than needed, as some models treat a very long press as a different command.
Recommended Gear
A reset rarely requires extra tools, but these items can help if you troubleshoot connection problems.
- A USB-C charging cable keeps the battery topped up so a reset doesn’t stall on low power. View on Amazon
- A short 3.5 mm audio cable lets you test whether the headphones work when wired, which helps separate Bluetooth problems from hardware faults. View on Amazon
FAQ
Will resetting my Bose QuietComfort headphones delete my music or settings?
A reset does not delete music, since the headphones don’t store music files. It does clear paired devices and may restore default settings such as the EQ or noise cancelling mode.
Do I need to charge my headphones before resetting?
It’s a good idea to charge them to at least half before resetting, because a low battery can cause the process to stop partway through.
How do I know the reset worked?
The headphones will power down and restart, and the status light will show its normal startup pattern. Your previously paired devices will no longer appear in the Bluetooth list until you pair again.
Conclusion
Resetting Bose QuietComfort headphones takes only a few button presses and clears most pairing and connection problems. After the reset, pair your device again and check the audio output before assuming a fault. If the problem continues, the issue is more likely hardware or warranty-related, so review your options before trying further repairs.

