Updated November 2026

To factory reset Bose QC headphones, you power the unit off, hold the power and Bluetooth buttons together until the status light flashes, then clear the saved device list on your phone. The reset wipes paired devices and returns the headphones to their default state, which often fixes connection drops, stuck pairing and odd audio behavior. The steps differ slightly between QuietComfort models, so check the one you own before you start.

Before You Start the Reset

A factory reset erases every paired device stored on the headphones, so you will need to pair them again afterward. Charge the headphones to at least half before you begin, since a reset that gets interrupted by a dying battery can leave them in a confusing state. If you are unsure how the power and Bluetooth controls work on your model, read How to Turn On Bose QC Headphones: A Step-by-Step Guide (2026) first.

Shopping for one? See our guide: 7 Best Bose QC SE Headphones of 2026: Buyer's Guide.

How to Factory Reset Bose QC Headphones Step by Step

  1. Turn the headphones off by sliding the power switch to off, or by pressing and holding the power button until the voice prompt says the unit is powering off.
  2. Press and hold the power button and the Bluetooth button together. On most QC models, hold them for about 10 seconds.
  3. Watch the status light. When it flashes amber and then white, release both buttons. Bose describes this flash as confirmation that the reset has started.
  4. Wait for the headphones to power down on their own, then turn them back on.

Clear the Old Pairing on Your Phone

Resetting the headphones does not remove them from your phone’s Bluetooth list. Open your phone’s Bluetooth settings, find the Bose entry, and choose Forget This Device (on iPhone) or Unpair (on Android). Skipping this step is the most common reason a reset appears to fail, because the phone keeps trying to reconnect to the old profile. For a fuller walkthrough of removing a device, see How to Unpair Bose Headphones: A Step-by-Step Guide (2026).

Pair the Headphones Again After the Reset

Once the headphones are reset, put them into pairing mode by holding the Bluetooth button until the voice prompt announces that they are ready to pair. Then select the Bose model from your phone’s list. If you use an iPhone, the process is slightly different, and How to Pair Bose Headphones to iPhone: A Step-by-Step Guide (2026) covers it in detail.

Common Mistakes to Avoid

  • Holding the buttons for too short a time. Release them early and the reset will not trigger.
  • Forgetting to remove the old pairing on your phone, which makes the headphones look broken.
  • Resetting with a low battery, which can interrupt the process.
  • Confusing a reset with a restart. A simple power cycle does not clear paired devices.
  • Assuming every QC model uses the same button combination. Check your exact model’s guide.
  • A USB-C charging cable: A reliable cable keeps the battery topped up so the reset does not stall partway through. Search for View on Amazon.
  • A soft carrying case: Protecting the headphones while you reset and re-pair them reduces the chance of accidental button presses in your bag. Search for View on Amazon.

FAQ

Does a factory reset delete my music or settings?

No. A factory reset clears paired devices and returns the headphone settings to default, but it does not touch any audio files on your phone or streaming account.

Why won’t my Bose QC headphones enter pairing mode after the reset?

The battery may be too low, or the phone may still be holding the old connection. Charge the headphones and forget the device on your phone before trying again.

Will I lose my warranty if I factory reset my headphones?

No. A reset is a normal user procedure and does not void the warranty. Review Warranty for Bose Headphones: How to Check, Claim and Protect Yours for details on coverage.

Conclusion

A factory reset is a quick way to clear stubborn pairing problems on Bose QC headphones. Power off, hold the power and Bluetooth buttons until the light flashes, then remove the old device from your phone. Pair the headphones again, and most connection issues should be resolved.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.