Updated November 2026

The Bose QC 35 II headphones are a wireless, over-ear pair with active noise cancelling, a built-in microphone and a Google Assistant or Alexa button on the left earcup. This guide walks you through pairing, charging, adjusting the noise cancelling level and fixing the problems owners most often report. It also explains how to tell a QC 35 II apart from its close relatives, so you know what you are working with.

Identify Your Model Before You Troubleshoot

Bose sold several headphones with the “QuietComfort 35” name, and the differences matter when you look up instructions. The QC 35 II is the wireless version with a Action button on the left earcup and a cable option for wired listening. Model labels and the Bose app will help you confirm which version you own. If you are comparing it with newer releases, the Bose QC Wireless Headphones: 5 Best Models for Every Need (2026) article lays out the lineup.

Shopping for one? See our guide: 7 Best Bose QC SE Headphones of 2026: Buyer's Guide.

Pair and Charge the Headphones

Start with a full charge, since pairing is far more reliable on a battery that has some reserve. Manufacturer guidance for this model generally follows the steps below.

  1. Charge the headphones with the included USB-C cable until the indicator shows a full charge. Owners often report that a charge of about 15 minutes gives a short playback window, so a full charge is the better starting point.
  2. Press and hold the Bluetooth button on the right earcup until you hear a voice prompt saying the headphones are ready to pair.
  3. On your phone or laptop, open Bluetooth settings and select the headphones from the list of available devices.
  4. Confirm the connection with the voice prompt or a status tone. Play a track to check audio on both earcups.

For full power-on and power-off behavior, see How to Turn On Bose QC Headphones: A Step-by-Step Guide (2026) and How to Turn Off Bose QC Headphones: 4 Quick Methods That Work (2026).

Adjust Noise Cancelling and Controls

Noise cancelling on the QC 35 II is switched through the Bose Connect app or by using the controls on the earcups, depending on your firmware. Active noise cancelling works best on steady, low-frequency sound such as engine rumble, air conditioning and airplane cabin noise. It does little against sudden sounds like voices or dropped objects, which is expected behavior for this technology.

The left earcup carries the voice assistant button, and the volume controls sit on the same side. Adjust these only after the phone connection is stable, because some Bluetooth stacks handle volume separately from the headphones.

Fix the Problems Owners Report Most

Most issues reported with the QC 35 II come down to pairing history, low battery or a dirty microphone. Work through these checks in order before assuming a hardware fault.

Symptom Likely cause What to try
Won’t connect to phone Old pairing record Delete the headphones from the phone’s Bluetooth list, then pair again from scratch
Audio cuts out Low battery or distance Charge fully and keep the phone within a few feet
Crackling or hiss Firmware or interference Update through the Bose app and move away from Wi-Fi routers
Caller can’t hear you Blocked microphone Clean the mic opening gently with a dry cotton swab

If a reset is needed, follow the steps in How to Unpair Bose Headphones: A Step-by-Step Guide (2026) before pairing again. Pairing with several devices at once can also cause drop-outs, so disconnect other sources first.

A soft carrying case protects the earcups and the hinge, which owners tend to stress when they toss the headphones into a bag. A compact travel case is a sensible choice for commuters. View on Amazon

A spare USB-C cable keeps charging simple, especially if you use the headphones on trips. View on Amazon

A small microfiber cloth helps keep the earcup surfaces and controls clean without scratching the finish. View on Amazon

Common Mistakes and Tips

  • Skipping the full charge. A partial charge is the most common reason for dropouts during first pairing.
  • Pairing to a phone while the headphones are still linked to a laptop. Disconnect the other device first.
  • Ignoring firmware updates. Check the Bose app regularly, since updates can fix connection behavior.
  • Expecting full silence from noise cancelling. It reduces steady sound well but will not block everything.
  • Storing the headphones with the earcups folded hard. Lay them flat in a case to protect the hinges.

FAQ

Can I use the Bose QC 35 II headphones with a wire?

Yes. The QC 35 II supports a cable connection for listening when the battery is flat, and the cable is typically sold separately. Check your model’s accessory list to confirm the correct cable type.

Why does my QC 35 II keep disconnecting?

Disconnects are most often caused by distance, a low battery, or interference from other devices. Keep your phone close, charge fully, and remove old pairings before trying again.

How do I know if my headphones are the QC 35 II?

Check the model label inside the headband or on the packaging, and confirm the features in the Bose app. The wireless version with a voice assistant button on the left earcup is the QC 35 II.

Conclusion

With a full charge, a clean pairing and a current firmware version, the Bose QC 35 II headphones should perform reliably for everyday listening and calls. Most issues come from old pairing records, low battery or a blocked microphone, and each has a simple fix. If problems continue after these steps, contact Bose support for further help.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.