Updated November 2026
Turning on Bose QC headphones usually takes one press and hold of the power button, and you’ll know it worked when you hear a voice prompt or a short tone. This guide covers how to power on the most common QuietComfort models, what to do if nothing happens, and how to confirm the headphones are ready to connect. The steps are the same across most QC generations, with a few small differences in where the button sits.
Power On Your Bose QC Headphones
Most QuietComfort over-ear models use a single multifunction power button on the right ear cup. Press and hold it for about two to three seconds until you hear “Power on” or a rising tone. Some earlier models use a slide switch instead, so move it from off to on.
Shopping for one? See our guide: 7 Best Bose QC SE Headphones of 2026: Buyer's Guide.
- Locate the power button on the right ear cup (or the slide switch on older units).
- Press and hold the button for two to three seconds.
- Wait for the voice prompt or tone. The status light may also turn on or blink.
- Check the headphones are on by playing audio or tapping the noise cancelling control.
Check the Battery If Nothing Happens
If the headphones stay silent, the battery is the most likely cause. Plug them into a USB-C cable connected to a power source for at least 15 minutes, then try again. Manufacturers specify that a full charge takes a few hours, so a short charge may still be enough to power them on. Owners often report that the status light shows orange or red while charging and turns off or changes color when charged.
Pair Your Headphones After Turning Them On
Once powered on, the headphones enter pairing mode automatically if they have no recent connection. You’ll hear a prompt such as “Ready to connect.” Open Bluetooth settings on your phone or laptop and select your Bose model from the list. If you are connecting an iPhone specifically, the steps are covered in detail in How to Pair Bose Headphones to iPhone: A Step-by-Step Guide (2026).
If the headphones don’t appear, press and hold the power button for about five seconds to force pairing mode, then refresh the device list on your phone.
Turn On the Headphones With Other Controls
Some QC models wake from a short press on the power or multifunction button, while others need a longer hold. Newer units may also power on when you put them on, depending on the auto-on setting in the Bose Music app. If you want to turn them off afterward, the process is simpler than it looks, and How to Turn Off Bose QC Headphones: 4 Quick Methods That Work (2026) walks through each option.
Troubleshooting When Bose QC Headphones Won’t Turn On
If charging and a firm press don’t work, try a soft reset. Hold the power button for about 15 to 20 seconds until the status light flashes, then release and press once to power on. Owners sometimes report that a drained battery needs a few minutes of charging before any response appears, so wait before assuming a fault. Connection drops after power-on are a separate issue, covered in Bose QC 45 Headphones: Why They Disconnect and How to Fix It.
Recommended gear
- USB-C charging cable: Keeps the battery topped up so the headphones power on reliably. View on Amazon
- Carrying case: Protects the ear cups and buttons from accidental presses in a bag. View on Amazon
Common Mistakes
- Pressing the button too briefly. A short tap often does nothing on QC models, so hold for two to three seconds.
- Assuming the headphones are dead after one charge attempt. Give them at least 15 minutes plugged in.
- Confusing the power button with the Bluetooth or noise cancelling control on the same cup.
- Forgetting to check the phone’s Bluetooth is on before searching for the headphones.
FAQ
Why won’t my Bose QC headphones turn on?
The battery is usually depleted. Charge them with a USB-C cable for at least 15 minutes, then hold the power button for two to three seconds.
How do I know my Bose QC headphones are on?
You should hear a voice prompt such as “Power on” or a rising tone, and the status light may turn on or blink.
Do I need the app to turn on Bose headphones?
No. The power button works without the app. The Bose app is only needed for changing settings like auto-on behavior.
Conclusion
Hold the power button for two to three seconds and wait for the voice prompt, and your QC headphones should turn on. If they don’t, charge them for at least 15 minutes and try a soft reset. Once they’re on, pairing takes only a few seconds through your device’s Bluetooth menu.

