Updated November 2026
Resetting Bose headphones clears stored Bluetooth pairings, restores default settings and often fixes connection, pairing or audio glitches. Most models can be reset in under five minutes using button presses alone, with no app or computer required. The steps below cover the most common Bose lines and explain what to do if a standard reset does not solve the problem.
Before You Start a Reset
A reset removes every paired device from the headphones, so you will need to pair them again afterward. Charge the headphones to at least 50 percent so they do not shut off partway through. Keep your phone or laptop nearby with Bluetooth turned on, and make sure no other device is currently connected to the headphones.
Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).
How to Reset Bose QuietComfort and Noise Cancelling Headphones
Most QuietComfort-series over-ear and in-ear models use a button-hold method. Manufacturers generally specify holding the Bluetooth button for about 10 seconds until the status light flashes, then releasing it. The exact steps vary slightly by model, so check the instructions printed in your user guide if the light does not respond.
- Power off the headphones completely.
- Press and hold the Bluetooth button (or the power button on some models) for roughly 10 seconds.
- Wait for the status light to flash, then release the button.
- Open Bluetooth settings on your phone and forget any old Bose entry.
- Turn the headphones on and pair them again.
Resetting Other Bose Models and Earbuds
Bose 700 headphones and some earbuds use a different sequence, often involving holding the power button together with the volume button. Owners of older models sometimes report that a reset only works after the headphones have been fully drained and then charged again. If you own a model that does not respond to the steps above, the Bose support site lists the reset procedure for each product line.
Using the Bose Music App
If you have the Bose app installed, you can often remove the paired device from within the app before resetting the hardware. This step is useful when the headphones show as connected to a phone you no longer use, because it prevents the old device from reconnecting automatically after the reset.
Troubleshooting If the Reset Does Not Work
If the status light never flashes, try charging the headphones for 20 to 30 minutes and repeat the button hold. A dead battery is the most common reason a reset appears to fail. If the headphones still will not reset, the internal firmware may need updating, which requires the Bose Music app or a computer connection.
Common Mistakes
- Releasing the button too early, before the status light flashes.
- Forgetting the headphones on your phone but leaving the old entry in Bluetooth settings, which can block re-pairing.
- Trying to reset while the headphones are still connected to another device.
- Assuming all Bose models use the same button combination.
- Skipping the step of checking the battery before starting.
Recommended Gear
A reliable USB-C charging cable helps keep the battery topped up during troubleshooting, since low power is a frequent cause of failed resets. View on Amazon
A small microfiber cloth helps keep the buttons and charging contacts clean, which can prevent a sticky button from interfering with the reset. View on Amazon
FAQ
Will resetting my Bose headphones delete my settings?
A reset clears Bluetooth pairings and typically returns sound and control settings to their defaults. Music and files on your phone are not affected.
How long does a Bose reset take?
The button-hold step usually takes about 10 seconds, and re-pairing with a phone normally takes another minute or two.
Can I reset Bose headphones without the app?
Yes. Most models can be reset using only the physical buttons, though the app can help remove old device connections and check for firmware updates.
Conclusion
A button-hold reset clears old pairings and resolves many connection problems in just a few minutes. If your model does not respond, check the user guide for your specific product line. Consult Bose customer support if the headphones still will not reset after charging and repeated attempts.
Related reading
- Warranty for Bose Headphones: How to Check, Claim and Protect Yours
- How to Turn Off Bose QuietComfort Headphones: 4 Quick Methods That Work (2026)
- How to Turn Off Bose QC Headphones: 4 Quick Methods That Work (2026)
- How to Pair Bose Headphones to iPhone: A Step-by-Step Guide (2026)
- Headphones Bose Black Friday: How to Spot Real Deals on Bose Headphones
- Bose Quietcomfort Ultra Headphones Deals: How to Spot Real Savings (2026)

