Updated November 2026
To pair Bose QuietComfort headphones, you put them into pairing mode, then select them from your device’s Bluetooth menu. Once paired, the headphones will reconnect automatically whenever they are powered on near that device. This guide walks through the process for most QuietComfort models and explains what to do when the headphones refuse to show up.
Before You Start
Pairing works best when a few basics are in place. Charge the headphones to at least 30 percent so they do not power down mid-process. Make sure Bluetooth is turned on for the device you want to connect, and keep the headphones within about three feet of it. If the headphones are already paired with another device, they may connect there first, so disconnect that device or switch off its Bluetooth temporarily.
Shopping for one? See our guide: 5 Best Bose QuietComfort Headphones Case Options for Travel (2026).
How to Put Bose QuietComfort Headphones Into Pairing Mode
Most QuietComfort models enter pairing mode the same way. Power the headphones off first, then press and hold the Bluetooth button until you hear a voice prompt saying the headphones are ready to pair. On some models, the status light will flash blue or white to confirm. If you hear a prompt that says the headphones are already connected, they are still linked to another device and will need to be disconnected first.
How to Connect Bose QuietComfort Headphones to Your Device
With the headphones in pairing mode, open the Bluetooth settings on your phone, tablet or computer. Select the entry that matches your model name, such as “QuietComfort” followed by the model number. When the device confirms the connection, you will usually hear a voice prompt or see a status light change. For detailed device-specific steps, see How to Pair Bose Headphones: A Step-by-Step Guide for Beginners, which covers the general process in more depth.
- Power off the headphones, then press and hold the Bluetooth button until you hear the pairing prompt.
- Open Bluetooth settings on your device and turn Bluetooth on.
- Select your QuietComfort model from the list of available devices.
- Wait for the confirmation prompt or light, then test audio playback.
Pairing QuietComfort Headphones With Apple and Mac Devices
Apple devices often show the headphones as a pop-up card when they enter pairing mode, which makes the process faster. If you use an iPhone, you can follow How to Pair Bose Headphones with iPhone: A Step-by-Step Guide for screen-by-screen directions. Mac users can find the same options under the Bluetooth section of System Settings, and How to Pair Bose Headphones with Mac: A Step-by-Step Guide (2026) covers that process in detail.
Troubleshooting When the Headphones Won’t Pair
If the headphones do not appear in the list, first confirm they are in pairing mode and not still connected to another device. Restarting both the headphones and the device often clears the problem. A Bose reset can also help if the pairing list is cluttered with old entries. For a full walkthrough, see How to Fix Bluetooth Headphones That Won’t Pair and How to Reset Bose Headphones: A Step-by-Step Guide (2026).
Common mistakes
- Starting the pairing process while the headphones are still connected to another device.
- Holding the Bluetooth button too briefly and never triggering pairing mode.
- Keeping the headphones too far from the device during setup.
- Forgetting to delete an old pairing entry, which can cause duplicate or stuck listings.
- Skipping the charge check, since low battery can interrupt the pairing sequence.
Recommended Gear
A USB-C charging cable is useful for topping up the headphones before pairing, especially if the battery is low. A soft carrying case also helps protect the headphones between sessions, which matters because repeated bumps can affect the Bluetooth antenna over time.
- Bose QuietComfort USB-C charging cable: keeps the battery topped up so pairing does not stall. View on Amazon
- Bose QuietComfort headphones carrying case: protects the headphones during transport. View on Amazon
FAQ
Why won’t my QuietComfort headphones show up in Bluetooth settings?
The headphones are most likely still linked to another device or not in pairing mode. Disconnect them from the other device, then press and hold the Bluetooth button until the pairing prompt sounds.
Can I pair my QuietComfort headphones with two devices at once?
Many QuietComfort models support multipoint connection, which lets them stay linked to two devices at the same time. Check your model’s manual, since support varies by generation.
Do I need to pair the headphones again after turning them off?
No. Once paired, the headphones reconnect automatically when powered on near a previously paired device, unless you have removed that pairing.
Conclusion
Pairing Bose QuietComfort headphones takes only a few minutes once you know the pairing mode button sequence. Charge the headphones, put them into pairing mode, and select them from your device’s Bluetooth list. If problems persist, a reset and a cleared pairing list will usually solve them.

