Updated November 2026
To pair Bose QC headphones, you put them into pairing mode, then select them from your device’s Bluetooth menu. Once paired, the headphones will reconnect automatically whenever they are switched on and within range of that device. This guide covers the pairing steps, how to handle multiple devices, and what to do when pairing fails.
Before You Start
Make sure the headphones are charged to at least a usable level, since low battery can cause the pairing prompt to time out. Also confirm that your phone, tablet or laptop has Bluetooth turned on. If the headphones were previously paired with another device, you may need to clear that connection first so the new device can see them as available.
Shopping for one? See our guide: 7 Best Bose QC SE Headphones of 2026: Buyer's Guide.
How to Put Bose QC Headphones in Pairing Mode
Most Bose QC models enter pairing mode the same way. Power the headphones off, then press and hold the Bluetooth button until you hear a voice prompt saying the headphones are ready to pair. On some models the status light will flash blue or white while they wait for a connection. Refer to the quick start guide included with your model if the light pattern differs.
Pairing Bose QC Headphones with Your Device
Once the headphones are in pairing mode, connect them from your device:
- Open the Bluetooth settings on your phone, tablet or computer.
- Wait for the Bose QC name to appear in the list of available devices. The name usually matches the model, such as “Bose QC45” or “Bose QuietComfort Headphones.”
- Select the headphones and confirm the connection if prompted.
- Listen for the voice prompt or check for a solid status light confirming the link.
On iPhone, a pop-up card may appear automatically when the headphones are nearby in pairing mode. Tapping Connect completes the process without going through the full Bluetooth menu. The Bose Music app can also help you manage settings after pairing, though it is not required for basic use.
Pairing with Multiple Devices
Many Bose QC models can hold connections to more than one device, which lets you switch between, for example, a laptop and a phone without re-pairing. The exact number of saved devices varies by model, so check your manual for the limit. To add a second device, put the headphones in pairing mode again while the first device is still connected, then select them from the second device. Automatic switching between connected devices depends on the model and the device’s Bluetooth behavior.
Managing Saved Devices
If the headphones keep connecting to the wrong device, remove the old entry from that device’s Bluetooth list. Forgetting the device there is often more effective than changing settings on the headphones themselves.
Common Mistakes
- Trying to pair while the headphones are still connected to another device, which blocks the new connection.
- Holding the power button instead of the Bluetooth button when entering pairing mode.
- Pairing from a device that is too far away, typically more than a few meters.
- Skipping the device’s Bluetooth permission prompts, which can stop the headphones from appearing.
- Leaving old pairings on phones and laptops, which creates duplicate entries and confusion.
Recommended Gear
A soft carrying case helps protect the headphones while you move between devices, and a short USB-C cable is handy if the battery runs low mid-session.
- Bose QC headphone carrying case: keeps the ear cups and cable protected during travel. View on Amazon
- USB-C charging cable: a spare cable lets you top up the battery without searching for the original. View on Amazon
FAQ
Why won’t my Bose QC headphones show up in Bluetooth settings?
The headphones are probably not in pairing mode, or they are still connected to another device. Turn them off, then re-enter pairing mode and try again while staying close to the device.
Can I pair Bose QC headphones with two devices at once?
Many models can stay connected to two devices at the same time, though the exact behavior depends on the model and the devices involved. Check the manual for your specific headphones.
What should I do if pairing keeps failing?
Restart both the headphones and the device, remove any old Bose entry from the Bluetooth list, and try again. If the problem continues, a factory reset usually clears the issue.
Conclusion
Pairing Bose QC headphones takes only a minute once you know to enter pairing mode first. Clear old connections when problems arise, and keep your devices within a short distance during setup. With those habits, the headphones should reconnect smoothly each time you use them.

