Updated November 2026

To pair Bose QC Ultra headphones, you put them into pairing mode, make them visible in your device’s Bluetooth menu, and select them from the list. Once paired, the headphones will reconnect automatically to that device whenever it is nearby and Bluetooth is on. The process takes less than two minutes for most people, and the steps below work for iPhone, Android, Mac and Windows.

Before You Start

Charge the headphones first. Bose lists a low battery as a common reason pairing fails or drops partway through, so plug them in or confirm the battery is well above empty. Also make sure the device you want to pair with has Bluetooth turned on and is not already connected to another pair of headphones or speakers.

Shopping for one? See our guide: 7 Best Bose QC SE Headphones of 2026: Buyer's Guide.

How to Put the Headphones Into Pairing Mode

The headphones must be in pairing mode before your device can see them. Power them off, then press and hold the power button until you hear a voice prompt or see the status light flash. Bose describes this as “ready to pair” mode, and it usually lasts a few minutes before the headphones time out.

  1. Turn the headphones off completely.
  2. Press and hold the power button until you hear the prompt indicating pairing mode.
  3. Leave them alone and move to your device.

How to Connect From Your Phone, Tablet or Computer

Open the Bluetooth settings on your device and look for the QC Ultra name in the list of available devices. Tap or click it, then confirm the connection if prompted. Your device should announce the connection, and the headphones will confirm it with a voice prompt.

Checklist for a Clean Connection

  • Bluetooth is on for the device you are pairing with.
  • The headphones are in pairing mode before you search.
  • No other device is trying to connect at the same moment.
  • The headphones are within a few feet of the device during setup.

Pairing Multiple Devices

Bose QC Ultra headphones support multipoint connections, which means they can stay linked to two devices at once. Pair each device using the steps above, then use the Bose Music app to check which devices are connected and to adjust the multipoint settings. Owners often report that audio switches to whichever device starts playing media, so pause playback on one device before using the other.

Common Mistakes

  • Searching for the headphones before they are in pairing mode, which leaves them invisible in the list.
  • Forgetting an old pairing on the device, which can block a fresh connection. Remove the old entry and try again.
  • Keeping the headphones too far from the device during setup.
  • Skipping a firmware update, which can fix odd connection behavior. Check for updates in the Bose Music app.
  • Bose QuietComfort Ultra carrying case: keeps the headphones protected between uses and helps prevent accidental presses on the controls while in a bag. View on Amazon
  • USB-C charging cable: a spare cable lets you keep the headphones charged at a desk or in the car, which helps avoid pairing problems caused by low battery. View on Amazon

FAQ

Why won’t my Bose QC Ultra headphones show up in Bluetooth settings?

The most common cause is that the headphones were not in pairing mode when you searched. Turn them off, press and hold the power button until the pairing prompt sounds, and search again.

Can I pair Bose QC Ultra headphones with a phone and a laptop at the same time?

Yes, the headphones support multipoint, so they can stay connected to two devices. You may need to adjust settings in the Bose Music app to manage which device takes priority.

What should I do if the headphones keep disconnecting after pairing?

Move closer to the device, keep other Bluetooth devices away during use, and make sure the firmware is current. If problems continue, a factory reset may help, and a repair service can check hardware issues.

Conclusion

Pairing Bose QC Ultra headphones comes down to putting them in pairing mode, selecting them from your device’s Bluetooth list, and confirming the connection. Keep the battery charged, remove old pairings that cause conflicts, and keep firmware up to date. With those habits, the headphones should reconnect quickly every time.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our brand headphones & noise cancelling guides, checking product details against manufacturer specifications and owner feedback.