Updated November 2026
To factory reset Bose headphones, you hold the power and Bluetooth buttons (or the power button alone, depending on the model) until the status light or voice prompt confirms the reset. This clears saved Bluetooth pairings, resets most settings to factory defaults, and often fixes persistent connection or audio problems. The exact button combination varies by model, so the steps below cover the most common Bose designs.
Before You Start
A reset erases every paired device from the headphones, so you will need to pair them again afterward. Charge the headphones to at least half before you begin, since a reset interrupted by a dead battery can leave them in an odd state. Keep the headphones within a few feet of the device you plan to pair with later.
Shopping for one? See our guide: Beats by Dre Headphones vs Bose: Which Should You Choose? (2026).
How to Factory Reset Bose Headphones by Model Type
Bose QuietComfort and Noise Cancelling Headphones
- Turn the headphones off and make sure they are not connected to a phone or laptop.
- Press and hold the power button and the Bluetooth button together for about 10 seconds.
- Wait for the status light to flash or for the voice prompt to say the headphones have been reset.
- Release both buttons and turn the headphones off for a few seconds before turning them back on.
Bose On-Ear and Wireless Headphones
Many on-ear models use a single button combination. Hold the power button for roughly 10 seconds until the light blinks, then release it. If the light does not respond, try holding the Bluetooth button instead, since some older models assign the reset to that control.
Bose Earbuds
For earbuds, place both buds in the charging case, close the lid, and wait about 30 seconds. Then open the lid, press and hold the button on the case until the light flashes, and confirm the reset in the Bose Music app if it prompts you. Check the manufacturer’s instructions for your specific earbud model, because the case button sequence differs between generations.
Confirm the Reset Worked
After the reset, turn the headphones on and open the Bluetooth menu on your phone or computer. The Bose headphones should no longer appear as a previously paired device, and they should show up as available for new pairing. If an old entry still shows on your phone, forget it in the Bluetooth settings before trying again.
Common Mistakes to Avoid
- Holding the buttons for too short a time. Most resets need a steady hold of about 10 seconds, not a quick press.
- Forgetting to delete the old pairing on your phone. The phone can keep trying to reconnect even after the headphones are reset.
- Resetting while the headphones are still connected to a device, which can cause the reset to fail silently.
- Using the wrong button combination for your model. Check which buttons your model actually has before following a generic guide.
- Expecting a reset to repair hardware damage. It clears software and pairing data, but it will not fix a broken driver or a worn battery.
FAQ
Will a factory reset delete my firmware updates?
No. A reset clears pairings and settings, but the headphones keep their installed firmware version. You can check for updates later in the Bose app.
Do I need the Bose app to reset my headphones?
Usually not. Most resets are done with button presses alone, though the app can confirm the reset and show the firmware version afterward.
What if the reset does not work?
Try charging the headphones fully, then repeat the button hold for the full duration. If the problem continues, contact Bose support, since your warranty may cover the unit depending on its age and condition.
Conclusion
A factory reset takes only a few minutes and clears old pairings and many software problems. Once the headphones reset, pair them again with your device to confirm they work as expected. If you run into trouble, check the official Bose support pages for your exact model.
Related reading
- Warranty for Bose Headphones: How to Check, Claim and Protect Yours
- How to Turn Off Bose QuietComfort Headphones: 4 Quick Methods That Work (2026)
- How to Turn Off Bose QC Headphones: 4 Quick Methods That Work (2026)
- How to Turn Off Bose Headphones: 4 Quick Methods That Work (2026)
- How to Pair Bose Headphones to iPhone: A Step-by-Step Guide (2026)
- Headphones Bose Black Friday: How to Spot Real Deals on Bose Headphones

